Repara tus cosas Comunidad Tienda

Rocketfish RF-WSP313 Speaker Replacement

Introducción

This guide will show you how to remove the components of the product necessary to access the bluetooth speaker, remove it, and replace it with a new one.

Qué necesitas

  1. Rocketfish RF-WSP313 Speaker Replacement, Speaker: paso 1, imagen 1 de 1

    • Using the metal spudger, remove the outer cap from the top of the device.

    Editar

  2. Rocketfish RF-WSP313 Speaker Replacement: paso 2, imagen 1 de 1

    • Using a Phillips # 1 screwdriver, remove the four 1.1 cm flathead screws attaching the metal ring to the top of the device.

    Editar

  3. Rocketfish RF-WSP313 Speaker Replacement: paso 3, imagen 1 de 1

    • Remove the ring and set aside.

    Editar

  4. Rocketfish RF-WSP313 Speaker Replacement: paso 4, imagen 1 de 1

    • Using the metal spudger, remove the cap from the bottom of the device.

    Editar

  5. Rocketfish RF-WSP313 Speaker Replacement: paso 5, imagen 1 de 1

    • Using a Phillips # 1 screwdriver, remove the four 1.1 sm screws attaching the metal ring to the bottom of the device.

    Editar

  7. Rocketfish RF-WSP313 Speaker Replacement: paso 6, imagen 1 de 1

    • Remove the ring and set aside.

    Editar

  8. Rocketfish RF-WSP313 Speaker Replacement: paso 7, imagen 1 de 1

    • Using a Phillips # 1 screwdriver, remove the four 1 cm screws from the outside panel. You will do this for each panel; it does not matter which side you start with.

    Editar

  9. Rocketfish RF-WSP313 Speaker Replacement: paso 8, imagen 1 de 1

    • Using the metal spudger, pry off the side panel. Repeat this step on the other side panel.

    Editar

  10. Rocketfish RF-WSP313 Speaker Replacement: paso 9, imagen 1 de 1

    • Using a Phillips #1 screwdriver, remove the four 1.1 cm flathead screws from the side of the device. Repeat this step on the other side of the device.

    Editar

  11. Rocketfish RF-WSP313 Speaker Replacement: paso 10, imagen 1 de 2 Rocketfish RF-WSP313 Speaker Replacement: paso 10, imagen 2 de 2

    • Using the metal spudger, open the device.

    Editar

  12. Rocketfish RF-WSP313 Speaker Replacement: paso 11, imagen 1 de 2 Rocketfish RF-WSP313 Speaker Replacement: paso 11, imagen 2 de 2
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar

    • Using your fingers (or a pair of tweezers), disconnect the speaker cord from its socket.

    Editar

  13. Rocketfish RF-WSP313 Speaker Replacement: paso 12, imagen 1 de 1

    • Using a Phillips #1 screwdriver, remove the four 1.2 cm pan head screws surrounding the speaker.

    Editar

  14. Rocketfish RF-WSP313 Speaker Replacement: paso 13, imagen 1 de 1

    • Remove the speaker from the device.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Kara Falknor

Miembro Desde 01/25/17

101 Reputación

1 Guía escrita

Insignias: 3

Equipo

Washington State, Team 1-50, Staggers Spring 2017 Miembro de Washington State, Team 1-50, Staggers Spring 2017

WSU-STAGGERS-S17S1G50

2 Miembros

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 12

Ultimos 30 días: 18

Todo El Tiempo: 570