Saltar al contenido principal

Ring Spotlight Cam Battery Motion Detector Replacement

Qué necesitas

  1. Ring Spotlight Cam Battery Motion Detector Replacement, Motion Detector: paso 1, imagen 1 de 1
    • Turn Ring Spotlight Cam to the posterior side and flip upside down

  2. Ring Spotlight Cam Battery Motion Detector Replacement: paso 2, imagen 1 de 1
    • Press down on top button and open upward

  3. Ring Spotlight Cam Battery Motion Detector Replacement: paso 3, imagen 1 de 1
    • Make sure to remove the batteries in the Spotlight cam before proceeding with this step!

    • Open the Spotlight Cam upward and remove the two screws with a Phillips #1 screwdriver.

  4. Ring Spotlight Cam Battery Motion Detector Replacement: paso 4, imagen 1 de 1
    • Remove the two screws down the middle and lift the middle component off

  5. Ring Spotlight Cam Battery Motion Detector Replacement: paso 5, imagen 1 de 1
    • Remove the remaining 10 screws that are around the border under the tape.

  6. Ring Spotlight Cam Battery Motion Detector Replacement: paso 6, imagen 1 de 1
    • Gently close the top of the lid

  7. Ring Spotlight Cam Battery Motion Detector Replacement: paso 7, imagen 1 de 1
    • Remove the top lid and replace the LED light

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 10

Ultimos 30 días: 59

Todo El Tiempo: 1,821