Repara tus cosas Comunidad Tienda

Ring Spotlight Cam Battery Lights Replacement

Introducción

If you are having trouble with the motion-activated lights and you would like to replace them, follow the 4 steps that are provided. It will take approximately 15-35 minutes.

Qué necesitas

  1. Ring Spotlight Cam Battery Lights Replacement, Lights: paso 1, imagen 1 de 1

    • Remove the top plastic pad by peeling it off with a metal spudger.

    Editar

  3. Ring Spotlight Cam Battery Lights Replacement: paso 2, imagen 1 de 2 Ring Spotlight Cam Battery Lights Replacement: paso 2, imagen 2 de 2

    • Remove the 7 PH00 screws around the four corners with PH00 of the lid.

    Editar

  4. Ring Spotlight Cam Battery Lights Replacement: paso 3, imagen 1 de 1

    • Use the metal spudger set to break the glue lining and the motion sensor will pop out.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

2 comentarios

this showed nothing about replacing the light bulb

Martha “purplemarty” Ewell - Contestar

This is not a complete how to. The directions stop in the middle and don't show the replacement of the LEDs. Also no parts link for the replacement LED strips

Matt Newman - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 7

Ultimos 7 días: 18

Ultimos 30 días: 92

Todo El Tiempo: 4,858