Ring Doorbell Battery Replacement

Introducción

This guide is to show how to open the Ring Doorbell to replace the battery. This is only for the 1st gen ring doorbells as newer versions do not have a battery and require full time power.

Qué necesitas

Paso 1 Battery

Ring Doorbell Battery Replacement, Battery: paso 1, imagen 1 de 1

Start by removing the 8 screws. the 4 black ones are hidden by the aluminum plate.

Traducir

Paso 2

Pry the aluminum cover carefully off- this will reveal the 4 black screws underneath. You will need a micro phillips screwdriver to remove these tiny screws.

Traducir

Paso 3

Carefully pry the plastic with a plastic pry tool to pop the insert out- watch the micro usb port that is sticking out...

Traducir

Paso 4

carefully pull directly up on the connector. The battery MAY still be attached to the plate-so be careful.

Traducir

Paso 5

This battery is two Lithium polymer batteries connected in parallel to the regulator. The batteries are back to back and are rated at 9.47wh @ 3.75v each...I have yet to find this battery but assume it is available somewhere in raw form.

Traducir

Conclusión

To reassemble your device, follow these instructions in reverse order.

33 personas más completaron esta guía.

Autor

con 14 otros colaboradores

Greg Beeblebrox

Miembro Desde 06/11/14

1,157 Reputación

2 Guías creadas

Insignias: 12

+ 9 más insignias

59 comentarios

This is one of the few products that it's rarely if ever necessary to replace a battery in, as the warranty will cover a rapidly draining or not-charging battery. I'm glad you didn't tear down your chime, too! ;)

pyrodice - 12 de jul. de 2017 Contestar