Repara tus cosas Comunidad Tienda

Ridgid R2611 Switch Bracket Replacement

Introducción

The trigger mechanism can jam or become less responsive overtime. This is due to over use.

Qué necesitas

  1. Ridgid R2611 Switch Bracket Replacement, Switch Bracket: paso 1, imagen 1 de 1

    • Remove the seven 2.5 mm screws on the top of the sander using the Torx T15 screwdriver.

    Editar

  2. Ridgid R2611 Switch Bracket Replacement: paso 2, imagen 1 de 1

    • Remove the top of the sander and put to the side.

    Editar

  3. Ridgid R2611 Switch Bracket Replacement: paso 3, imagen 1 de 1

    • Use the screwdriver to unscrew the two #6-19 X 5/8 in screws holding down the outlet cord.

    Editar

  4. Ridgid R2611 Switch Bracket Replacement: paso 4, imagen 1 de 1

    • Remove the cord from the handle.

    Editar

  6. Ridgid R2611 Switch Bracket Replacement: paso 5, imagen 1 de 1

    • Remove the outer plastic piece holding down the white and black wires.

    Editar

  7. Ridgid R2611 Switch Bracket Replacement: paso 6, imagen 1 de 1

    • Unplug the two connecting pieces that hold wires.

    Editar

  8. Ridgid R2611 Switch Bracket Replacement: paso 7, imagen 1 de 1

    • Using the screwdrivers, unscrew the four #6-19 X 5/8 in screws on rectangular block.

    Editar

  9. Ridgid R2611 Switch Bracket Replacement: paso 8, imagen 1 de 1

    • Remove the black and white wires by pulling out.

    Editar

  10. Ridgid R2611 Switch Bracket Replacement: paso 9, imagen 1 de 1

    • Put the screwdriver in the holes to release remaining two wires.

    Editar

  11. Ridgid R2611 Switch Bracket Replacement: paso 10, imagen 1 de 1

    • Remove the two remaining wires from switch, leaving the switch freed.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 6

Todo El Tiempo: 272