Repara tus cosas Comunidad Tienda

Ridgid R2611 Hook and Loop Backing Pad Replacement

Introducción

The hook and loop can wear down over time, which is completely normal due to constant use. The replacement parts for this guide can be easily purchased.

Qué necesitas

  1. Ridgid R2611 Hook and Loop Backing Pad Replacement, Hook and Loop Backing Pad: paso 1, imagen 1 de 1

    • Flip the sander on its side to expose the bottom.

    Editar

  3. Ridgid R2611 Hook and Loop Backing Pad Replacement: paso 2, imagen 1 de 1

    • Remove the four 2.5 mm Phillips #1 screws with the flathead screwdriver.

    Editar

  4. Ridgid R2611 Hook and Loop Backing Pad Replacement: paso 3, imagen 1 de 1

    • Remove the hook and loop backing pad from the sander.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 6

Todo El Tiempo: 386