Repara tus cosas Comunidad Tienda

Ridgid Angle Grinder R10202 Carbon Brush Replacement

Introducción

This replacement guide will walk you through how to remove and replace the two carbon brushes. You may also find this guide useful if you need to inspect the carbon brush housing for debris that may be hindering the device's performance.

Qué necesitas

  1. Ridgid Angle Grinder R10202 Carbon Brush Replacement, Carbon Brush: paso 1, imagen 1 de 2 Ridgid Angle Grinder R10202 Carbon Brush Replacement, Carbon Brush: paso 1, imagen 2 de 2

    • Use a flathead screwdriver to unscrew the brush holder cap.

    Editar

  3. Ridgid Angle Grinder R10202 Carbon Brush Replacement: paso 2, imagen 1 de 2 Ridgid Angle Grinder R10202 Carbon Brush Replacement: paso 2, imagen 2 de 2

    • Using your fingers, gently lift the carbon brush up and out of its housing.

    • Repeat these steps to remove the other carbon brush on the opposing side.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 3

Ultimos 30 días: 20

Todo El Tiempo: 1,258