Qué necesitas
-
-
Place curling iron on a flat surface along with the required tools and swivel cord replacement.
-
-
Herramienta utilizada en este paso:Flathead 3/32" or 2.5 mm Screwdriver$5.49
-
Unscrew the two 3mm screws from both sides of the barrel clip with a 3.0 flathead screwdriver to remove the clip from the barrel.
-
Set the two screws and barrel clip aside for reassembly at a later point.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
2 personas más completaron esta guía.