Partes

No se requieren partes.

Before disassembly, make sure that the device is unplugged.
  • Before disassembly, make sure that the device is unplugged.

  • Unscrew the two 17.83 mm black screws located on the handle.

Agregar Comentario

Separate the shell from the main component.
  • Separate the shell from the main component.

  • Make sure that the each piece is free from debris.

Agregar Comentario

Continue to pull the components apart. For reassembly, put the silver encasing on before the the black cover. For reassembly, put the silver encasing on before the the black cover.
  • Continue to pull the components apart.

  • For reassembly, put the silver encasing on before the the black cover.

Agregar Comentario

The heating element is the group of tightly coiled bronze wires behind the vent hose as well as the silver coils.
  • The heating element is the group of tightly coiled bronze wires behind the vent hose as well as the silver coils.

  • Make sure that there are no breaks or debris obstructing the wires of the heating element.

Agregar Comentario

To test the heating element, use a digital multimeter.
  • To test the heating element, use a digital multimeter.

  • Set the multimeter to 200 under ACV.

  • Bring the ends of the multimeter toward the two lead wires.

  • If the circuit between the wires is closed, the numbers on the multimeter should keep changing.

  • If the numbers are not changing, replace the heating element.

  • If the circuit is closed, check the thermal cutout.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jessica Leyva

Miembro Desde 18/09/12

80 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 1-5, Propen Fall 2012 Miembro de Cal Poly, Team 1-5, Propen Fall 2012

CPSU-PROPEN-F12S1G5

3 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 14

Todo El Tiempo: 1,006