Introducción

Clean the head of the hairdryer, including the vent, to prevent the fan from getting clogged. Debris in the fan may cause a rattling noise or cause the fan to stop working.

  1. Before disassembly, make sure that the device is unplugged.
    • Before disassembly, make sure that the device is unplugged.

    • Unscrew the two 17.83 mm black screws located on the handle.

    Agregar Comentario

  2. Separate the shell from the main component.
    • Separate the shell from the main component.

    • Make sure that the each piece is free from debris.

    Agregar Comentario

    • Continue to pull the components apart.

    • For reassembly, put the silver encasing on before the the black cover.

    Agregar Comentario

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Take the head of the hairdryer and pull the pieces apart.

    Agregar Comentario

    • Remove the black vent from the grey cylindrical piece.

    Agregar Comentario

    • If there is lint in the vent, use tweezers or a toothbrush to extract it from the vent.

    • This will keep the fan from getting clogged and malfunctioning.

    Agregar Comentario

    • Clean the other black vent with a toothbrush.

    Agregar Comentario

    • Clean these two components with a paper towel.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Jessica Leyva

Miembro Desde 18/09/12

80 Reputación

5 Guías creadas

Equipo

Cal Poly, Team 1-5, Propen Fall 2012 Miembro de Cal Poly, Team 1-5, Propen Fall 2012

CPSU-PROPEN-F12S1G5

3 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 17

Todo El Tiempo: 1,089