Repara tus cosas Comunidad Tienda

Retro-Bit Retro Duo Controller Button and Pad Replacement.

Introducción

If your controller(s) have button malfunctions, they can be replaced.

Qué necesitas

  1. Retro-Bit Retro Duo Controller Button and Pad Replacement., Buttons and Pads in Controller(s): paso 1, imagen 1 de 3 Retro-Bit Retro Duo Controller Button and Pad Replacement., Buttons and Pads in Controller(s): paso 1, imagen 2 de 3 Retro-Bit Retro Duo Controller Button and Pad Replacement., Buttons and Pads in Controller(s): paso 1, imagen 3 de 3

    • With the controller on its face, remove the five 6 mm Phillips #1 screws.

    • After screw removal, carefully lift the controller casing.

    Editar

  2. Retro-Bit Retro Duo Controller Button and Pad Replacement.: paso 2, imagen 1 de 3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: paso 2, imagen 2 de 3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: paso 2, imagen 3 de 3

    • Pinch the top and bottom of the shoulder pads, then lift out.

    • There are small elastic pads below each shoulder pad. Replace these if they are not functioning correctly.

    Editar

  4. Retro-Bit Retro Duo Controller Button and Pad Replacement.: paso 3, imagen 1 de 3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: paso 3, imagen 2 de 3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: paso 3, imagen 3 de 3

    • Carefully lift the circuit board from the controller case.

    Editar

  5. Retro-Bit Retro Duo Controller Button and Pad Replacement.: paso 4, imagen 1 de 3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: paso 4, imagen 2 de 3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: paso 4, imagen 3 de 3

    • To replace the action button pad, lift this part out.

    • Lift the Select and Start button pad.

    • If replacing the D-Pad, lift this pad.

    • Pinch and lift the shoulder button pads.

    Editar

  6. Retro-Bit Retro Duo Controller Button and Pad Replacement.: paso 5, imagen 1 de 3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: paso 5, imagen 2 de 3 Retro-Bit Retro Duo Controller Button and Pad Replacement.: paso 5, imagen 3 de 3

    • Support the controller face and push buttons toward the inner case.

    • Use care. The buttons have a tiny tab to keep them in place.

    • Support the controller face and push the D-Pad toward the inner case.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Evelyn

Miembro Desde 09/25/17

223 Reputación

2 Guías creadas

Insignias: 4

+1 mas insignia

Equipo

USF Tampa, Team S4-G4, Eyestone Fall 2017 Miembro de USF Tampa, Team S4-G4, Eyestone Fall 2017

USFT-EYESTONE-F17S4G4

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 17

Todo El Tiempo: 1,181