Repara tus cosas Comunidad Tienda

Retro-Bit Retro Duo Cartridge Doors Replacement

Introducción

How to replace the console's cartridge doors. These cover the cartridge slots and hold games in place.

Qué necesitas

  1. Retro-Bit Retro Duo Cartridge Doors Replacement, Cartridge Doors: paso 1, imagen 1 de 3 Retro-Bit Retro Duo Cartridge Doors Replacement, Cartridge Doors: paso 1, imagen 2 de 3 Retro-Bit Retro Duo Cartridge Doors Replacement, Cartridge Doors: paso 1, imagen 3 de 3

    • With the console on its top. Remove the four 12 mm Phillips #2 screws.

    • There may be a sticker covering one or more of the screws. Remove it before the screws.

    • Flip the console on its feet, pinch near the AV/S ports, and carefully lift the top casing.

    • Do not completely remove the top casing. There is a small LED circuit board connected to the main circuit board.

    Editar

  2. Retro-Bit Retro Duo Cartridge Doors Replacement: paso 2, imagen 1 de 3 Retro-Bit Retro Duo Cartridge Doors Replacement: paso 2, imagen 2 de 3 Retro-Bit Retro Duo Cartridge Doors Replacement: paso 2, imagen 3 de 3

    • Remove the one 6 mm Phillips #0 screw.

    • Lift the top case and set aside.

    Editar

  4. Retro-Bit Retro Duo Cartridge Doors Replacement: paso 3, imagen 1 de 3 Retro-Bit Retro Duo Cartridge Doors Replacement: paso 3, imagen 2 de 3 Retro-Bit Retro Duo Cartridge Doors Replacement: paso 3, imagen 3 de 3

    • Remove the eight 10 mm Phillips #0 screws.

    • The cartridge doors are spring-loaded and may pop up.

    Editar

  5. Retro-Bit Retro Duo Cartridge Doors Replacement: paso 4, imagen 1 de 2 Retro-Bit Retro Duo Cartridge Doors Replacement: paso 4, imagen 2 de 2

    • Carefully lift the cartridge door case and set aside.

    Editar

  6. Retro-Bit Retro Duo Cartridge Doors Replacement: paso 5, imagen 1 de 2 Retro-Bit Retro Duo Cartridge Doors Replacement: paso 5, imagen 2 de 2

    • Take the cartridge doors out of the top casing.

    • Keep the correct cartridge doors together. Note the door numbers and position.

    • Doors numbered two and four are for NES cartridges.

    • Doors numbered three are for SNES cartridges.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Truong Vo

Miembro Desde 09/25/17

320 Reputación

3 Guías creadas

Insignias: 8

+ 5 más insignias

Equipo

USF Tampa, Team S4-G4, Eyestone Fall 2017 Miembro de USF Tampa, Team S4-G4, Eyestone Fall 2017

USFT-EYESTONE-F17S4G4

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 567