Repara tus cosas Comunidad Tienda

ResMed AirSense 10 Air Intake Filter Replacement

Equipo médico
El fabricante de este equipo médico no ha avalado o contratado a iFixit ni a esta guía de reparación.

Introducción

This guide will explain how to replace the air intake filter in the ResMed AirSense 10 ventilator. Regularly check the intake air filter to prevent the entry of dust and water. Replace the intake air filter every 6 months or if there are any damages or blockages to the filter.

Qué necesitas

  1. ResMed AirSense 10 Air Intake Filter Replacement, Air Intake Filter: paso 1, imagen 1 de 2 ResMed AirSense 10 Air Intake Filter Replacement, Air Intake Filter: paso 1, imagen 2 de 2

    • The air filter cover is plastic mesh plate, on the same side as SD card holder.

    • Pry open the intake air filter cover on the bottom of the left side panel of the device.

    Traducir

  2. ResMed AirSense 10 Air Intake Filter Replacement: paso 2, imagen 1 de 2 ResMed AirSense 10 Air Intake Filter Replacement: paso 2, imagen 2 de 2

    • Remove the used air filter and inspect for damages or blockages.

    • Replace the air filter as needed.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

2 comentarios

The filter has a smooth side and a fuzzy side. Which side goes against the cover? Or doesn't it matter? Thanks.

Barbara Pollack - Contestar

I’m wondering the same……

Just looked it up, fuzzy side should face outward.

Joanie K - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 6

Ultimos 7 días: 39

Ultimos 30 días: 252

Todo El Tiempo: 4,233