Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

]

Resumen del Video

  1. Make sure power is off, and remove the side panel.
    • Make sure power is off, and remove the side panel.

  2. Remove the screws that hold the GPU in on the rear bracket.
    • Remove the screws that hold the GPU in on the rear bracket.

  3. Unlock the PCI-e slot chip.
    • Unlock the PCI-e slot chip.

  4. Remove the GPU by gently pulling on the card.
    • Remove the GPU by gently pulling on the card.

  5. Hover the new GPU over the PCI-e slot.
    • Hover the new GPU over the PCI-e slot.

  6. Push down on the card to slide the connector into the slot.
    • Push down on the card to slide the connector into the slot.

  7. Ensure that the secure locks click into place.
    • Ensure that the secure locks click into place.

  8. Screw the rear bracket down to secure the card to the chassis.
    • Screw the rear bracket down to secure the card to the chassis.

  9. Reconnect any required GPU cables.
    • Reconnect any required GPU cables.

  10. Reattach the side panel.
    • Reattach the side panel.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Lance Donadel

Miembro Desde 25/04/18

221 Reputación

1 Guía escrita

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 5

Ultimos 30 días: 25

Todo El Tiempo: 679