Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Replacing the Macintosh PowerBook 1400c Monitor

Introducción

This repair guide will give you step by step instructions on how to remove the Macintosh PowerBook 1400c Monitor.

Qué necesitas

  1. Replacing the Macintosh PowerBook 1400c Monitor, Battery: paso 1, imagen 1 de 1

    • Turn the device upside down and then locate the battery latch near the front of the device.

    Traducir

  2. Replacing the Macintosh PowerBook 1400c Monitor: paso 2, imagen 1 de 1

    • Slide the latch to the left to release the battery.

    Traducir

  3. Replacing the Macintosh PowerBook 1400c Monitor: paso 3, imagen 1 de 1

    • Continue holding the latch then gently pull the battery out of the device.

    • Place the battery in a safe location.

    Traducir

  4. Replacing the Macintosh PowerBook 1400c Monitor, CD-ROM Drive: paso 4, imagen 1 de 1

    • Locate the CD-ROM Drive latch.

    Traducir

  5. Replacing the Macintosh PowerBook 1400c Monitor: paso 5, imagen 1 de 1

    • Slide the latch to the right to release the CD ROM drive.

    Traducir

  6. Replacing the Macintosh PowerBook 1400c Monitor: paso 6, imagen 1 de 1

    • Continue holding the latch then gently pull the CD-ROM Drive out of the device.

    • Place the CD ROM drive in a safe location.

    Traducir

  7. Replacing the Macintosh PowerBook 1400c Monitor, Keyboard: paso 7, imagen 1 de 1

    • Locate the speaker cover.

    Traducir

  8. Replacing the Macintosh PowerBook 1400c Monitor: paso 8, imagen 1 de 1

    • Press firmly on each end of the speaker cover and slide it to the left.

    Traducir

  9. Replacing the Macintosh PowerBook 1400c Monitor: paso 9, imagen 1 de 1

    • Gently lift the speaker cover to remove it.

    Traducir

  10. Replacing the Macintosh PowerBook 1400c Monitor: paso 10, imagen 1 de 1

    • Lift the keyboard up from the back using a spudger(wedge side).

    Traducir

  11. Replacing the Macintosh PowerBook 1400c Monitor: paso 11, imagen 1 de 1

    • Gently lift the keyboard until only the ribbon cable remains attached.

    Traducir

  12. Replacing the Macintosh PowerBook 1400c Monitor: paso 12, imagen 1 de 1

    • Tilt the keyboard away from the screen.

    Traducir

  13. Replacing the Macintosh PowerBook 1400c Monitor: paso 13, imagen 1 de 1

    • Locate the six screws that secure the heatsink.

    Traducir

  15. Replacing the Macintosh PowerBook 1400c Monitor: paso 14, imagen 1 de 1

    • Remove the six screws from the heatsink using the Philips #1 screwdriver.

    Traducir

  16. Replacing the Macintosh PowerBook 1400c Monitor: paso 15, imagen 1 de 1

    • Lift the heatsink from the side closest to the laptop screen.

    Traducir

  17. Replacing the Macintosh PowerBook 1400c Monitor: paso 16, imagen 1 de 1

    • Remove the heatsink.

    Traducir

  18. Replacing the Macintosh PowerBook 1400c Monitor: paso 17, imagen 1 de 1

    • Gently pull up on the beige ribbon lock until it moves a short distance on both sides to separate the ribbon cable from the connector.

    Traducir

  19. Replacing the Macintosh PowerBook 1400c Monitor: paso 18, imagen 1 de 1

    • Detach the ribbon cable.

    Traducir

  20. Replacing the Macintosh PowerBook 1400c Monitor: paso 19, imagen 1 de 1

    • Remove the keyboard.

    Traducir

  21. Replacing the Macintosh PowerBook 1400c Monitor, Monitor: paso 20, imagen 1 de 1

    • Identify the right and left monitor end caps.

    Traducir

  22. Replacing the Macintosh PowerBook 1400c Monitor: paso 21, imagen 1 de 1

    • Pry off the end caps by putting a spudger between the monitor hinge and the end cap and prying outwards.

    Traducir

  23. Replacing the Macintosh PowerBook 1400c Monitor: paso 22, imagen 1 de 1

    • Once the end cap has been loosened by the spudger, pull outwards on the end caps.

    Traducir

  24. Replacing the Macintosh PowerBook 1400c Monitor: paso 23, imagen 1 de 1

    • Completely remove both end caps.

    Traducir

  25. Replacing the Macintosh PowerBook 1400c Monitor: paso 24, imagen 1 de 1

    • Identify the 4 total screw under the end caps (2 under each end cap).

    • The two outside 16mm long screws

    • The two inside 5.4mm long screws

    Traducir

  26. Replacing the Macintosh PowerBook 1400c Monitor: paso 25, imagen 1 de 1

    • Lay the monitor all the way back.

    Traducir

  27. Replacing the Macintosh PowerBook 1400c Monitor: paso 26, imagen 1 de 1

    • Remove the 4 screws using the Phillips #0 screwdriver.

    Traducir

  28. Replacing the Macintosh PowerBook 1400c Monitor: paso 27, imagen 1 de 1

    • Identify the center cap of the monitor.

    Traducir

  29. Replacing the Macintosh PowerBook 1400c Monitor: paso 28, imagen 1 de 1

    • Pry the center cap off by placing the spudger between the hinge and the center cap and prying upwards.

    Traducir

  30. Replacing the Macintosh PowerBook 1400c Monitor: paso 29, imagen 1 de 1

    • Detach the center cap completely.

    Traducir

  31. Replacing the Macintosh PowerBook 1400c Monitor: paso 30, imagen 1 de 1

    • Identify the one 12.6mm long screw under the center cap.

    Traducir

  32. Replacing the Macintosh PowerBook 1400c Monitor: paso 31, imagen 1 de 1

    • Remove the center screw with a Phillips #0 screwdriver.

    Traducir

  33. Replacing the Macintosh PowerBook 1400c Monitor: paso 32, imagen 1 de 1

    • Lift upwards on the metal cover under the screw.

    Traducir

  34. Replacing the Macintosh PowerBook 1400c Monitor: paso 33, imagen 1 de 1

    • Completely remove the metal cover.

    Traducir

  35. Replacing the Macintosh PowerBook 1400c Monitor: paso 34, imagen 1 de 1

    • Identify where the left and right monitor cords are attached to the logic board

    • The base of the left monitor cord

    • The base of the right monitor cord

    Traducir

  36. Replacing the Macintosh PowerBook 1400c Monitor: paso 35, imagen 1 de 1

    • To detach the left monitor cord grab the left monitor cord at the base of the cord and pull vertically up.

    Traducir

  37. Replacing the Macintosh PowerBook 1400c Monitor: paso 36, imagen 1 de 1

    • Completely detach the left monitor cord from the logic board.

    Traducir

  38. Replacing the Macintosh PowerBook 1400c Monitor: paso 37, imagen 1 de 1

    • To detach the right monitor cord grab the right monitor cord at the base of the cord and pull vertically up.

    Traducir

  39. Replacing the Macintosh PowerBook 1400c Monitor: paso 38, imagen 1 de 1

    • Completely detach the right monitor cord from the logic board.

    Traducir

  40. Replacing the Macintosh PowerBook 1400c Monitor: paso 39, imagen 1 de 1

    • Completely remove the monitor from the computer.

    Traducir
Conclusión

Once the monitor has been removed, to attach the new monitor follow these instructions in reverse order.

5 personas más completaron esta guía.

Autor

con 4 otros colaboradores

Taylor Chris

Miembro Desde 04/01/11

187 Reputación

1 Guía escrita

Insignias: 8

+ 5 más insignias

Equipo

Cal Poly, Team 10-39, Forte Spring 2011 Miembro de Cal Poly, Team 10-39, Forte Spring 2011

CPSU-FORTE-S11S10G39

5 Miembros

6 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 5

Ultimos 30 días: 28

Todo El Tiempo: 4,174