Saltar al contenido principal

Replacing an Atari Capacitor

Qué necesitas

  1. Replacing an Atari Capacitor, Atari Lynx: paso 1, imagen 1 de 1
    • Before disassembling your Atari Lynx, be sure the device is powered off.

    • Remove any game in the console by opening the right latch and sliding the game to the right.

  2. Replacing an Atari Capacitor: paso 2, imagen 1 de 1
    • Remove the four 35 mm Phillips #1 screws at each corner of the backside on the Atari Lynx.

    • Pinch the rear panel with your fingers and lift away from the Atari.

  3. Replacing an Atari Capacitor: paso 3, imagen 1 de 1
    • Remove the battery panel by pinching the sides with your fingers and lifting it away from the Atari.

    • Be sure not to tear any wires attached to battery panel.

  4. Replacing an Atari Capacitor: paso 4, imagen 1 de 1
    • Remove the control panel by pinching the sides with your fingers and lifting it away from the Atari.

    • Be sure not to tear the speaker wire while removing the control panel.

  5. Replacing an Atari Capacitor, C10 Capacitor: paso 5, imagen 1 de 2 Replacing an Atari Capacitor, C10 Capacitor: paso 5, imagen 2 de 2
    • Desolder the four aluminum tabs and for more information on soldering click here.

  6. Replacing an Atari Capacitor: paso 6, imagen 1 de 1
    • Remove the aluminum back protector to gain access to the C10 capacitor.

  7. Replacing an Atari Capacitor: paso 7, imagen 1 de 2 Replacing an Atari Capacitor: paso 7, imagen 2 de 2
    • Desolder the C10 capacitor.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

John Lopez

Miembro Desde 01/27/14

443 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 1-42, Maness Winter 2014 Miembro de Cal Poly, Team 1-42, Maness Winter 2014

CPSU-MANESS-W14S1G42

5 Miembros

16 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 7

Ultimos 30 días: 34

Todo El Tiempo: 4,973