Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Turn off the refrigerator by unplugging it or turning the breaker off.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
With a Phillips screwdriver, unscrew and remove the two screws on the hinge located directly in the middle of the door, connecting the assembly flap to the door.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Located at the bottom of the assembly flap, remove the bottom plastic piece by gently shimmying it out with a small flat head screwdriver.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Carefully lift the assembly flap upward guiding it along the top and bottom plastic hinge just before it comes off.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
On the bottom of the assembly flap, carefully insert the spring into the plastic holes. One is connected to the bottom plastic hinge and the other is attached to the assembly flap.
-
Slide the assembly flap down into place. Be sure the top and bottom plastic hinge slides into place. You’ll notice the spring securely sliding into the plastic holes.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Re-insert the bottom plastic piece by pressing it in until it snaps.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Replace the two screws on the middle, metal hinge.
-
Turn the power on. Fast Fix is complete.
-
Cancelar: No complete esta guía.
3 personas más completaron esta guía.