Saltar al contenido principal

Replacing Olympus Stylus Tough-6000 Battery/Memory Card Cover Lock

Qué necesitas

  1. Replacing Olympus Stylus Tough-6000 Battery/Memory Card Cover Lock, Locate the Battery/Memory Card Cover Lock.: paso 1, imagen 1 de 1
    • Turn the camera so the bottom is facing upwards.

  2. Replacing Olympus Stylus Tough-6000 Battery/Memory Card Cover Lock: paso 2, imagen 1 de 1
    • First pull open latch to expose two screws covering lock.

    • Use your Phillips #00 screwdriver and unscrew both screws.

  3. Replacing Olympus Stylus Tough-6000 Battery/Memory Card Cover Lock: paso 3, imagen 1 de 1
    • Remove the small black lock.

  4. Replacing Olympus Stylus Tough-6000 Battery/Memory Card Cover Lock: paso 4, imagen 1 de 1
    • Turn latch over.

    • There will be one screw visible holding down the cover.

    • Unscrew single screw with your Phillips #00 screwdriver.

  5. Replacing Olympus Stylus Tough-6000 Battery/Memory Card Cover Lock: paso 5, imagen 1 de 1
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar
    • Use your tweezers for this step.

    • After unscrewing the screw you will see a single spring.

    • Make sure spring is in place to be able to close lock properly.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 3

Ultimos 30 días: 17

Todo El Tiempo: 965