Introducción

How to replace the speaker.

  1. Slide the battery release latch to the right.
    • Slide the battery release latch to the right.

    • Pull out the battery out towards the front of the device.

    Agregar Comentario

  2. Remove the 7 mm Philip screws.
    • Remove the 7 mm Philip screws.

    • Remove the 10 mm Philip screws.

    • Remove the 14 mm Philip screw.

    Agregar Comentario

    • Open the flap on the left hand side.

    Agregar Comentario

    • Insert the iPod opening tools between the right and left sides of the latch.

    • Pry the right side of the latch, and then pry the left side to detach the laptop's cover.

    Agregar Comentario

    • Open the flap on the right side.

    Agregar Comentario

    • Insert the iPod opening tools towards the right side of the latch.

    • Gently pry the right side out to release the top cover.

    Agregar Comentario

    • Lift the keyboard slowly.

    • A cable connects the keyboard to the motherboard. If you are not careful, you will damage the cable.

    Agregar Comentario

    • Use your fingers or a spudger to detach the connector.

    Agregar Comentario

    • Carefully lift and remove the keyboard.

    Agregar Comentario

    • Slowly and carefully lift the speaker with your fingers.

    • The port that the speaker plugs into can be easily removed from the motherboard if not careful! Unplug the speaker with extreme caution!

    Agregar Comentario

    • Use your fingers to unplug the wires from the connector.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Equipo

Cal Poly, Team 26-27, Regan Spring 2010 Miembro de Cal Poly, Team 26-27, Regan Spring 2010

CPSU-REGAN-S10S26G27

3 Miembros

18 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 1,503