Saltar al contenido principal

Replacing Creative Zen X-Fi Button Input Chip Part 1

Qué necesitas

  1. Replacing Creative Zen X-Fi Button Input Chip Part 1, Detaching Front Case: paso 1, imagen 1 de 3 Replacing Creative Zen X-Fi Button Input Chip Part 1, Detaching Front Case: paso 1, imagen 2 de 3 Replacing Creative Zen X-Fi Button Input Chip Part 1, Detaching Front Case: paso 1, imagen 3 de 3
    • Using a spudger, wedge the tip between the front and back case to pry them apart.

    • Be careful to not apply excessive force since there are six fasteners on the screen's side that holds the cases firmly together.

  2. Replacing Creative Zen X-Fi Button Input Chip Part 1, Rubber Button Cover: paso 2, imagen 1 de 1
    • The black rubber button pad can be removed by simply picking it up.

  3. Replacing Creative Zen X-Fi Button Input Chip Part 1, Button Input Chip Part 1: paso 3, imagen 1 de 1
    • Flip the LCD screen off the midsection plate to gain access to the space around the input button chip.

  4. Replacing Creative Zen X-Fi Button Input Chip Part 1, Button Input Chip: paso 4, imagen 1 de 1
    • Using a spudger, pry off the button input chip from the mid-section of the device. To gain best leverage, start at the bottom right corner and level your way up the side of the chip.

    • Be aware that the button input chip is glued to the mid-section, so some extra force may be required.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Westley Courchene

Miembro Desde 01/13/15

3,362 Reputación

14 Guías creadas

Equipo

USF Tampa, Team 1-1, Remmell Fall 2015 Miembro de USF Tampa, Team 1-1, Remmell Fall 2015

USFT-REMMELL-F15S1G1

5 Miembros

14 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 308