Introducción

When a zipper pull breaks, or the slider simply wears out, you don’t need to replace the entire zipper. Just replace the zipper slider and the stop that keeps it from sliding off. This is a quick repair that can make the difference between a zipper that doesn’t work at all and one that works like it’s brand new. Determine the size of your replacement slider by looking on the bottom of your existing slider.

For replacement parts or further assistance, contact Patagonia Customer Service.

Resumen del Video

  1. Locate the top of the zipper on the side with the slider. Use end nippers to cut the stop off of the zipper. Be careful to only cut the plastic, not the fabric.
    • Locate the top of the zipper on the side with the slider.

    • Use end nippers to cut the stop off of the zipper.

    • Be careful to only cut the plastic, not the fabric.

  2. Use tweezers to remove any remaining pieces of the stop from the garment.
    • Use tweezers to remove any remaining pieces of the stop from the garment.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Slide the slider off of the garment. Slide the slider off of the garment. Slide the slider off of the garment.
    • Slide the slider off of the garment.

  5. Insert the new slider onto the zipper. You may need to tug a little to get the slider over the webbing from the old stop. Make sure the zipper slider is oriented right-side up when you slide it back onto the zipper.
    • Insert the new slider onto the zipper.

    • You may need to tug a little to get the slider over the webbing from the old stop.

    • Make sure the zipper slider is oriented right-side up when you slide it back onto the zipper.

    Bonjour, je n’arrive pas à faire descendre le nouveau curseur, seriez vous pourquoi ?

    vcarpentier78 - Contestar

  6. Grab a replacement stop. Position the new stop over the webbing in the same place where the old stop was located. Position the new stop over the webbing in the same place where the old stop was located.
    • Grab a replacement stop.

    • Position the new stop over the webbing in the same place where the old stop was located.

  7. Use pliers to crimp the stop into place. Use pliers to crimp the stop into place.
    • Use pliers to crimp the stop into place.

Linea de Meta

29 personas más completaron esta guía.

Brittany McCrigler

Miembro Desde 05/03/12

81,228 Reputación

132 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

108 Miembros

8,294 Guías creadas

Where do I get the parts needed?

jonaskrat - Contestar

Off of another zipper

nerdyrepair -

Amazon has replacement parts, but I found you can get almost any zipper parts from a sailing supply company called sailrite.com.

Scott Lamorte -

Perfect...thank you! I had seen about 10 other videos on how to do this repair but yours was the one that showed me exactly how to do it and it worked perfectly the first time. Much appreciated!

starrdustt57 - Contestar

Thank you! This was great - I ordered the knippers and replacement parts for a jacket of mine that I broke, as I know my children will be breaking there's sooner or later. It cost me $10 instead of $40+ to replace a jacket.

Megan Elmore - Contestar

Where did you get the replacement end plastic endstop?

Deborah Spaulding -

I can not thank you enough for this tutorial. I had contacted a seamstress and she said it would have to be replaced. Thank heavens I found your site. The zipper pull has been replaced on the zipper and I'm awaiting my order of stops to replace the top stop. Thank you, Thank you!

Mary Axtell - Contestar

Where can I buy the things needed to do this please?

Val Neale - Contestar

Amazon or sailrite.com

Scott Lamorte -

Hi

The tutorial is fab and I checked out sailrite for zippers which brings me a step further, but how do I determine the right size zipper. There is no numbers or anything on my current broken zipper. I thought about measuring the bottom or the top and going from that measurement? Any feedback appreciated.

thanks Jenny

Jenny - Contestar

Where did you get the replacement stop?

edward schmitt - Contestar

I lost the original slider …. how will we know what to buy ?

Rishi Rampaul - Contestar

I lost the original slider … how will I know what to buy ?

Rishi Rampaul - Contestar

Sometimes, if the slider is not broken, but it doen’t connect the two sides any more, you can very, very gently squize the upper and lower side of the slider. Most of the times it will be o.k. again.

Paul A. - Contestar

You can check other zippers (if any) on pockets as they’re often the same size. A good quality zipper will have the size stamped on the back. Standard exterior coat zippers are size 5.

Sarah Gerber - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 152

Últimos 7 Días: 1,500

Últimos 30 Días: 7,710

Todo El Tiempo: 227,582