Saltar al contenido principal

Replace MSI GT72 2QE Dominator Pro Wireless Card

Qué necesitas

  1. Replace MSI GT72 2QE Dominator Pro Wireless Card, Wireless Card: paso 1, imagen 1 de 2 Replace MSI GT72 2QE Dominator Pro Wireless Card, Wireless Card: paso 1, imagen 2 de 2
    • Remove the seven 6 mm Philips #0 screws on the bottom of the case.

  2. Replace MSI GT72 2QE Dominator Pro Wireless Card: paso 2, imagen 1 de 1
    • Gently pull from the rear of the case upwards to remove the bottom of the laptop.

  3. Replace MSI GT72 2QE Dominator Pro Wireless Card: paso 3, imagen 1 de 1
    • Remove the yellow tape from the wireless card at the center right of the board.

  4. Replace MSI GT72 2QE Dominator Pro Wireless Card: paso 4, imagen 1 de 2 Replace MSI GT72 2QE Dominator Pro Wireless Card: paso 4, imagen 2 de 2
    • Using a pair of pliers, remove both wires by pulling straight up from the wireless card.

    • Do not jerk or yank too hard as it can break off connectors.

  5. Replace MSI GT72 2QE Dominator Pro Wireless Card: paso 5, imagen 1 de 2 Replace MSI GT72 2QE Dominator Pro Wireless Card: paso 5, imagen 2 de 2
    • Remove one Philips #0 screw from the motherboard.

  6. Replace MSI GT72 2QE Dominator Pro Wireless Card: paso 6, imagen 1 de 1
    • Pull card up and out from the motherboard.

    • Do not touch gold contacts as it can damage the card.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Robert Stepp

Miembro Desde 07/24/20

181 Reputación

1 Guía escrita

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 26

Todo El Tiempo: 1,052