Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Introducción

Mi PS4 se cayó de una estantería y la esquina delantera donde se sitúa la antena se dañó. Eso causó que la soldadura del cable que conectaba la antena con la placa se rompiera. Eso causó retraso con los mandos y tenías que sentar al lado de la consola. El mando funcionaba por un minuto y se desconectaba. El botón X no funcionaba.

De la manera que lo he solucionado podría solucionar defectos de fábrica en los que la antena no estuviera bien conectada.

  1. Usando una picadura dental o algo similar, retira las tres pegatinas en la carcasa inferior. Usando una picadura dental o algo similar, retira las tres pegatinas en la carcasa inferior. Usando una picadura dental o algo similar, retira las tres pegatinas en la carcasa inferior.
    • Usando una picadura dental o algo similar, retira las tres pegatinas en la carcasa inferior.

  2. Quita los tres tornillos negros en la caja inferior con un desarmador de seguridad Torx T9. Quita los tres tornillos negros en la caja inferior con un desarmador de seguridad Torx T9.
    • Quita los tres tornillos negros en la caja inferior con un desarmador de seguridad Torx T9.

  3. Tira de un lado de la caja, luego la otra y luego desliza la caja hacia atrás. Entonces estará libre del resto de la consola. Tira de un lado de la caja, luego la otra y luego desliza la caja hacia atrás. Entonces estará libre del resto de la consola. Tira de un lado de la caja, luego la otra y luego desliza la caja hacia atrás. Entonces estará libre del resto de la consola.
    • Tira de un lado de la caja, luego la otra y luego desliza la caja hacia atrás. Entonces estará libre del resto de la consola.

  4. Quita los cinco tornillos que sujetan la fuente de alimentación. Hay dos tornillos de seguridad torx PH1 y tres T9. Quita los cinco tornillos que sujetan la fuente de alimentación. Hay dos tornillos de seguridad torx PH1 y tres T9. Quita los cinco tornillos que sujetan la fuente de alimentación. Hay dos tornillos de seguridad torx PH1 y tres T9.
    • Quita los cinco tornillos que sujetan la fuente de alimentación. Hay dos tornillos de seguridad torx PH1 y tres T9.

    My T9 torx doesnt fit do u know whats wrong?

    Peter Schooneman - Contestar

  5. Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch

    Kits para Nintendo Switch

    Una solución rápida para volver al juego

    Comprar kits de Switch
  6. Primero jala hacia arriba en un lado de la fuente de alimentación, luego tira hacia arriba en el otro lado. Suavemente pero con firmeza sacúdelo. Ten cuidado al tirar de la fuente de alimentación, ya que todavía está conectado con un conector de la placa base. Ten cuidado al tirar de la fuente de alimentación, ya que todavía está conectado con un conector de la placa base.
    • Primero jala hacia arriba en un lado de la fuente de alimentación, luego tira hacia arriba en el otro lado. Suavemente pero con firmeza sacúdelo.

    • Ten cuidado al tirar de la fuente de alimentación, ya que todavía está conectado con un conector de la placa base.

  7. La fuente de alimentación puede levantarse y girarse hacia abajo y fijarla en el banco de trabajo. Ten mucho cuidado de no tirar de la fuente de alimentación, ya que todavía estará conectada a la placa base Utiliza pinzas antiestáticas  para tirar suavemente hacia arriba en la antena WiFi.
    • La fuente de alimentación puede levantarse y girarse hacia abajo y fijarla en el banco de trabajo.

    • Ten mucho cuidado de no tirar de la fuente de alimentación, ya que todavía estará conectada a la placa base

    • Utiliza pinzas antiestáticas para tirar suavemente hacia arriba en la antena WiFi.

    • Ten cuidado de no aplicar demasiada fuerza en el conector WiFi, ya que puede romperse.

    • Después de desconectar el cable WiFi, desvía el cable de los dos clips y debajo del cable de la unidad óptica.

  8. Retira el tornillo de seguridad torx T9 de la antena WiFi situada en la parte frontal de la consola. La antena WiFi ahora puede ser totalmente removida de la PS4. La antena WiFi ahora puede ser totalmente removida de la PS4.
    • Retira el tornillo de seguridad torx T9 de la antena WiFi situada en la parte frontal de la consola.

    • La antena WiFi ahora puede ser totalmente removida de la PS4.

  9. Como puedes ver, hay 2 puntos de soldadura. El cable debe pasar por el primer punto hasta el segundo punto. Pero cuando el sistema se cayó, rompió esa conexión y la antena se dobló. Si en la fábrica los puntos de soldadura no son correctos, causará el mismo problema de retraso con el controlador y WiFi.
    • Como puedes ver, hay 2 puntos de soldadura. El cable debe pasar por el primer punto hasta el segundo punto. Pero cuando el sistema se cayó, rompió esa conexión y la antena se dobló. Si en la fábrica los puntos de soldadura no son correctos, causará el mismo problema de retraso con el controlador y WiFi.

    What’s the metal made of?

    Hamza Ali - Contestar

  10. Esta es la parte fácil. Retira la antena. Mueve el cable entre los dos puntos de soldadura para que se conecte al segundo punto. Una vez allí, toma tu soldador y calienta la soldadura y arrástrala sobre el cable para hacer la conexión.
    • Esta es la parte fácil. Retira la antena. Mueve el cable entre los dos puntos de soldadura para que se conecte al segundo punto. Una vez allí, toma tu soldador y calienta la soldadura y arrástrala sobre el cable para hacer la conexión.

    • Recuerda dejar este espacio. No dobles la antena para que las puntas te toquen. El espacio que queda se ha diseñado así, y cambiarlo podría tener efectos adversos en el mando y WiFi. Pero es así de fácil. Mi PS4 ahora funciona perfectamente con su mando y WiFi. No hace falta desarmar nada más ni comprar piezas. Enciende tu PS4, y listo para jugar.

    Hi, I think I have a similar problem to you, although my wifi/bluetooth doesn't work at all. Do you think this is the problem or could it be a problem with the module instead?

    spotty plays - Contestar

Conclusión

Para volver a montar tu dispositivo sigue estas instrucciones al revés.

25 personas más completaron esta guía.

Un agradecimiento especial a estos traductores:

100%

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

bdcallen69

Miembro Desde 01/12/15

855 Reputación

1 Guía escrita

My console was giving me the same problem aft lots of research i came across ur guide and today i fixed the wifi antenna and its working awesome Thanks alot

Muzaffar - Contestar

I've run into a similar problem (PS4 won't recognize controllers) but wifi works fine. Is it possible that bluetooth doesn't work but wifi does?

gustavo - Contestar

I replaced my antenna with a new one. But im still experiencing input lag. What else should I do?

angellom90 - Contestar

Me too man same problem really wanted it fixed but no luck :(

Ahmd -

I am having the exact same problem as you, if by any chance you are reading this and you fix it after 2 years pls help me

Matias Fernandez -

THANK YOU SO VERY MUCH for making this with great pictures and everything. This was exactly the fix I needed for my bad reception and disconnection problems. For everyone that will try this. It is very important tho have those spaces in the metal. There are two parts to the cable. The silvery thread like wires,and the solid wire covered by yellowish insulation rubber. The threads needs to be sodered on one side, and the solid wire on he other side/tab. Don not have the soder from either wires touching. Hope this further helps,and thanks again bdcallen69,and two other contributors. You are my heroes today.

Nathaniel - Contestar

Thank you all for the comments. Im glad I could help you all out.

bdcallen69 - Contestar

I appreciate the point in the right direction, thank you for that. I just stripped about an inch off and tossed the antenna, works great even lose in the system. Went from barely two feet to over 40. Maybe I'll attach it to the antenna and see if distance is increased.

The Mad Hater - Contestar

Great guide! You saved my 4day weekend. Kid tripped over Ethernet cable and controller started wiggin' out. Followed the guide and even cleaned my fan, so it was really a blessing in disguise as my console runs quietly like in the before time!!!

Hardest part was getting through Walmart on Black Friday (actually Thanksgiving evening around 6pm... c'mon people) to get a soldering iron. Anyway, was afraid I wouldn't get to raid and help Guardians in Destiny get to the lighthouse by getting rekt in Trials of Osiris! Thanks again!

thunderdon79 - Contestar

To be frank I am not particularly clear on this. The reason being is the wire is a Shielded cable.

So, is the Shield soldered on the first piece and the inner wire soldered on the second piece

OR

is the Shield removed and only the inner wire soldered ??

Mark - Contestar

Thank You for the awesome fix, first time I did not realize their were 2 wires and of course the fix didn't work. After I realizedthere were 2 wires like a coaxle TV antenna wire the fix worked great! Again Thank You Very Much! Also tried it like someone posted about not using the metal at all just stripped 1" of wire & 1/8" of shielding wire so two wires aaren't touching, this worked also, No Solder Needed! Unbelievable Son & I lived with this nightmare for 3 years, mostly he did. Unit took a fall His Freshman Year at College. I had thought maybe a broken PC board(green board)!

Timothy Oliver - Contestar

This guide was a %#*@ lifesaver, if you're having connection problems with your ds4 controller to the ps4 this guide will more than likely solve your problems, in my case it wasn't the solder point, it was the opposite end of the wire that was disconnected from the little round fuse under the power bank, I simply had to attach it on! Thank you to the creator of this guide !!!

OhhMarx _ - Contestar

So I did this and now my controller can be used across the room, which is &&^&^$^ awesome. BUT now every few minutes the screen will randomly go black or have white/gray static lines going through the screen for a brief second. Which isn't the worst, but still a bit annoying. Is it possible I did anything wrong, and if so how could I fix it? It's not impossible that it's something unrelated to this guide, like my HDMI cable, or something.

Timithy Smith - Contestar

Hi ! I verify thee antena and its fine but my controller disconnects when I plug on headphones! Please HELP! And also disconnects randomly …..what can I do????!!!

dragotasergiu - Contestar

My controller sometimes just shuts off and lags if i is connected by usb cable the problems get worst. I just checked my antenna and it looks fine so is there anyone who knows what coulb be wrong and how to fix it? (Iknow my english isn't the best but it's my second language so forgive me for that one)

Matthijs Arends - Contestar

Hello.

I have the same problem my controller randomly shuts off and sometimes lags for like 1 minute and then everything works correctly again. When i connect it by usb cable the lag get's worst. I just checked my antenne which looks fine to me. So if anyone has a clue what's going on please tell me.

Matthijs Arends - Contestar

Its probably the bluetooth chip if this fix is not working. I cba to even try this because ill probably have to order a new chip instead.

https://www.youtube.com/watch?v=cTD3jjo1...

Gustav Eurenius - Contestar

Thanks for the guide.

My controller can't turn on my PS4 but works fine when it is on. Also my PS4 can't find any routers via WiFi.

Would it be the antenna that I need to change?

Thanks

Marco Polo - Contestar

Dude this happened to me yesterday..im hoping i can fix it with this here otherwise the repair people are telling me i need a new ps4 due to my motherboard having problems

Gabriel Rubio -

Just did this and and it worked! I’ve abandoned my PS4 after it fell a year ago because controller would lag, disconnect, give random commands etc. I went to Sony they said they would do it for like 150$ I was like &&^& no and I did it for free now so thanks author.

jalal ali - Contestar

THANK YOU VERY MUCH!!! IT REALY WORKS!!! After re-soldering my antenna, the controller working perfectly

Hansendt Gaming - Contestar

do I need to strip the wire first at all? i just re soldered and it still has a lag issue. is there anywhere in the UK I can order a new antenna from?

:Luka Stavrou - Contestar

wondering if this will help my controllers from not working if the light beam is covered up from my legs being crossed. no physical damage has been done to the ps4 but it is an old version. the destiny 1 edition that was just the game and the white console XD. i may have to try this

Krysstofer Pigott - Contestar

Thank you, you saved me a lot of money and time, had to buy only the soldering iron. Had this problem for six months till I decided to open the ps4 myself. To others, bear in mind that the cable is coaxial like, only a little tiny, and one end should not touch the another, because it is an antenna! With patience, you'll succeed. Thanks again!

Retr0 - Contestar

Nice writeup. Very well done. I was getting issues with my controllers. If I was withing 4ft it was okay, but further than that it became very poor, laggy and disconnecting. Never been dropped, took it apart following the guide, great information on tools required.

My antenna was fine, no broken wire at the end. However the plug that goes to the main board was a bit discoloured and tarnished. Cleaned up and reseated. Works like a dream now, far end of the room still working great.

Dan Potter - Contestar

Disgusting that a new console would require rework to repair crappy workmanship a low level QC person could have caught and obviously there is no engineering in these pieces of $@$*.

bduce2001 - Contestar

I would try this but the issue only occurs when I connect MY hotspot to the PS4, everyone else has a hotspot and they work fine, but mine specifically does not work, leading me to believe that there is an issue elsewhere l. Any suggestions?

Daniel - Contestar

Hallo leute, gleiches problem!! habs angelötet und gleicher scheiss!! weiss wer, ob die ps4 alle bluetooth sticks kennt?? ihr müsst euch nen bluetooth stick ab2.0 mindestens besorgen und mitm cotroller verbinden!! gibts a anleitung auf youtube!! ich brauche bitte hille bei meinem problem!!!

mfg. Sip

Josip Stjepanovic - Contestar

Super!!! Vielen Dank.

Bertram von Hoerner - Contestar

Is it safe to do it by your self?… cause I have this problem that my ps4 can't recognize the controllers and I can't connect them with the console.. I want to fix it by my self cause I can't sent it for fix to someone that knows how to do it because of quarantine

evaggelia_sisi - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 94

Ultimos 7 días: 624

Ultimos 30 días: 2,598

Todo El Tiempo: 116,369