Saltar al contenido principal

Seville Classics MSC10166 Buttons Replacement

Qué necesitas

  1. Seville Classics MSC10166 Buttons Replacement, PCB (Printed Circuit Board): paso 1, imagen 1 de 1
    • Use the Phillips #2 screwdriver to remove the four 6 mm screws by unscrewing counterclockwise.

    Hi I had the same problem where the fan would turn on it just wouldn't rotate. So I read all these solutions and right before I started to take the fan apart,my husband toke it and sprayed some WD-40,along the base above the plug where it rotates. Spray all around. Wait about 3mins,plug it in, and BAM it works great…. Thank God for husband's,

    tiffany Gallardo - Contestar

  2. Seville Classics MSC10166 Buttons Replacement: paso 2, imagen 1 de 1
    • Pull the front and back cover apart.

    • Be careful not to pull the front cover off completely. It holds the wires.

  3. Seville Classics MSC10166 Buttons Replacement: paso 3, imagen 1 de 1
    • Remove the Phillips 6 mm screw that holds the circuit board to the outer shell of the fan.

    • Shock warning: Make sure the fan is unplugged before removing the circuit board.

  4. Seville Classics MSC10166 Buttons Replacement: paso 4, imagen 1 de 1
    • Remove the top cover containing the circuit board and the wires by pulling it away from the outer shell of the fan.

  5. Seville Classics MSC10166 Buttons Replacement: paso 5, imagen 1 de 2 Seville Classics MSC10166 Buttons Replacement: paso 5, imagen 2 de 2
    • Remove the screws from the four corners of the circuit board.

    • Remove the circuit board from the top cover.

    • Do not touch the other side of the circuit board to avoid damaging the circuit elements.

  6. Seville Classics MSC10166 Buttons Replacement, Buttons: paso 6, imagen 1 de 1
    • Remove the two 8 mm screws that attach the buttons to the top cover of the fan.

  7. Seville Classics MSC10166 Buttons Replacement: paso 7, imagen 1 de 1
    • Remove the buttons from the top cover.

  8. Seville Classics MSC10166 Buttons Replacement: paso 8, imagen 1 de 1
    • Wipe down any dirt on the buttons.

  9. Seville Classics MSC10166 Buttons Replacement: paso 9, imagen 1 de 1
    • Wipe down the frame that holds the buttons.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Queena Phung

Miembro Desde 09/26/12

114 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 15-46, Forte Fall 2012 Miembro de Cal Poly, Team 15-46, Forte Fall 2012

CPSU-FORTE-F12S15G46

5 Miembros

6 Guías creadas

2 comentarios

Great work but our problem is the micro switch itself, after exposing the circuit board I shorted the backside solder connections to cycle the fan on and off, everything works perfectly…..now I only need to know a part number so I can find a on/off micro switch.

any suggestions?

Thanks for any help you can provide

rickkingsbury@comcast.net

Rick - Contestar

Is there a way to keep the fan in ALWAYS ON position. So I can control it’s ON/OFF using a smart plug?

Vish Talreja - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 12

Todo El Tiempo: 3,902