Repara tus cosas Comunidad Tienda

Repairing iPhone 4 dust mesh

Introducción

DIY replacement of iPhone dust mesh.

Replacing a iPhone speaker dust mesh on the front of an iPhone would require disassembling the whole phone. There is an easier and much cheaper workaround for this...

Qué necesitas

  1. Repairing iPhone 4 dust mesh, Repairing iPhone 4 dust mesh: paso 1, imagen 1 de 2 Repairing iPhone 4 dust mesh, Repairing iPhone 4 dust mesh: paso 1, imagen 2 de 2

    • Left image shows iPhone with missing front dust mesh

    • Right image shows dust meshes on bottom

    Editar

  3. Repairing iPhone 4 dust mesh: paso 2, imagen 1 de 2 Repairing iPhone 4 dust mesh: paso 2, imagen 2 de 2

    • Cut out a piece of stainless steel mesh of the tea filter using a pocket knife

    • Trim the piece of mesh using a pair of scissors to a size of approx. 3x9 mm

    Editar

  4. Repairing iPhone 4 dust mesh: paso 3, imagen 1 de 2 Repairing iPhone 4 dust mesh: paso 3, imagen 2 de 2

    • Fold the piece of mesh longways using the plastic tip

    • Use a pair of tweezers to insert the folded piece of mesh into the hole above the speaker

    • Put piece of mesh into place using plastic tip

    • That's it - see the result on the images

    Editar
Linea de Meta

28 personas más completaron esta guía.

Autor

con 5 otros colaboradores

aiwo

Miembro Desde 03/13/12

2,286 Reputación

1 Guía escrita

Insignias: 9

+ 6 más insignias

Un comentario

This may work fine for most dirt, but with the original design there is also a cloth mesh behind the metal mesh that helps to keep finer particles out of the speaker.

This is definitely a much much much easier way to get some sort of protection in there at least. :)

Rene Jeddore - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 5

Ultimos 30 días: 9

Todo El Tiempo: 50,260