Saltar al contenido principal

Repairing a Wooden Steam Locomotive Toy

Qué necesitas

  1. Repairing a Wooden Steam Locomotive Toy, Smoke Stack: paso 1, imagen 1 de 1
    • Locate all the missing wooden parts of the toy.

    • Clean the toy and parts so they are free from food and grime

  2. Repairing a Wooden Steam Locomotive Toy: paso 2, imagen 1 de 1
    • Tools needed:

    • - Sandpaper 150 grit

    • - Good quality wood glue

  3. Repairing a Wooden Steam Locomotive Toy: paso 3, imagen 1 de 1
    • Sand the part of the wooden smoke stack that is going to be fixed to the steam locomotive

    • Clean the wood dust

  4. Repairing a Wooden Steam Locomotive Toy: paso 4, imagen 1 de 1
    • Sanded and cleaned part free of dust and old glue

  5. Repairing a Wooden Steam Locomotive Toy: paso 5, imagen 1 de 1
    • Apply a thin and even layer of wood glue to the sanded portion

  6. Repairing a Wooden Steam Locomotive Toy: paso 6, imagen 1 de 1
    • Fix the smoke stack to the steam engine

    • Clean the excess glue around the joint with a paper towel

  7. Repairing a Wooden Steam Locomotive Toy: paso 7, imagen 1 de 1
    • Choo-choo, the steam locomotive is as good as new.

Conclusión

To reassemble your device, follow these instructions in reverse order.

claudius

Miembro Desde 12/12/10

29 Reputación

2 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 2,487