Repara tus cosas Comunidad Tienda

Repairing a Broken Ceramic Pot

Introducción

If your ceramic pot breaks, do not worry: you can repair it even if it is reduced to pieces. All you will need is precision and a strong adhesive. This guide will focus on the repair of a ceramic pot, but can be used to repair other ceramic, pottery, and porcelain items.

For this repair you will be reconstructing your ceramic pot with Gorilla Glue that you purchased from a hardware store. This guide will also explain how much glue to apply and for how long, how to handle sharp edges and strong adhesive, and how long to let the glue set.

Step 4 requires you to use Gorilla Glue. Gorilla Glue is an inexpensive and effective adhesive for this fix. Alternative adhesives can also work as long as they are waterproof and translucent.

Qué necesitas

  1. Repairing a Broken Ceramic Pot, Repairing a Broken Ceramic Pot: paso 1, imagen 1 de 1

    • Gather all fragmented pieces of the broken pot.

    • Caution: Be careful handling broken pieces. Edges might be sharp.

    Editar

  2. Repairing a Broken Ceramic Pot: paso 2, imagen 1 de 1

    • Assemble each fragment of the pot temporarily to understand where each piece goes.

    Editar

  3. Repairing a Broken Ceramic Pot: paso 3, imagen 1 de 1

    • Clean the edges of the pot and its fragments with a clean cloth or paper towel.

    Editar

  5. Repairing a Broken Ceramic Pot: paso 4, imagen 1 de 1

    • Apply a small amount of Waterproof Gorilla Glue to the edges of the broken pot.

    • Gorilla Glue recommends 1 dot per square inch.

    • Caution: Do not touch glue with fingers. Wear gloves for extra precaution.

    Editar

  6. Repairing a Broken Ceramic Pot: paso 5, imagen 1 de 2 Repairing a Broken Ceramic Pot: paso 5, imagen 2 de 2

    • Carefully fit the fragmented piece along the glued area and hold it firmly for 10-45 seconds.

    Editar

  7. Repairing a Broken Ceramic Pot: paso 6, imagen 1 de 1

    • Glue the inside of the pot for extra coverage and hold.

    • Repeat this process for other broken pieces, if any.

    Editar

  8. Repairing a Broken Ceramic Pot: paso 7, imagen 1 de 1

    • Let the glue set for at least 24 hours.

    Editar
Conclusión

Repeat steps as needed until your pot is fully reassembled.

Una persona más ha completado esta guía.

Autor

con 3 otros colaboradores

Christina Liles

Miembro Desde 09/20/21

145 Reputación

1 Guía escrita

Insignias: 3

Equipo

University of North Texas, Team 1-14, Friess Fall 2021 Miembro de University of North Texas, Team 1-14, Friess Fall 2021

UNT-FRIESS-F21S1G14

1 Miembro

2 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 9

Ultimos 7 días: 44

Ultimos 30 días: 227

Todo El Tiempo: 5,745