Saltar al contenido principal

Introducción

How to manually advance a stuck gear train.

Partes

No se especificaron partes.

  1. Move film door slide on the left side of camera forward. Pull film door open.
    • Move film door slide on the left side of camera forward.

    • Pull film door open.

  2. Baterías para ordenadores portátiles

    Un pequeño arreglo para un gran resultado.

    Comprar Ahora

    Baterías para ordenadores portátiles

    Un pequeño arreglo para un gran resultado.

    Comprar Ahora
  3. Locate small silver gear in top left corner of film bay.
    • Locate small silver gear in top left corner of film bay.

  4. Using a plastic opening tool, rotate gear downward until jam is cleared.
    • Using a plastic opening tool, rotate gear downward until jam is cleared.

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Matthew Lessig

Miembro Desde 20/01/10

54 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 3-18, Maness Winter 2010 Miembro de Cal Poly, Team 3-18, Maness Winter 2010

CPSU-MANESS-W10S3G18

4 Miembros

4 Guías creadas

How do you know if the jam is cleared ? I have the same camera but the problem with mine is the shutter button. Every time I press the red and black one it won't make the noise or spit out the film unless I go one button behind. Although when I do that the photo comes out black. I think the two buttons or supposed to be together so when you press the red and black button the one behind it moves in sync. I really need help on fixing it and I'm not sure if what I said made any sense but I need help.

Tiffany - Contestar

I have this very same problem…You explained it perfectly, however, I can’t figure out how to fix it. Please someone help us!

Jordan Brown -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 6

Últimos 30 Días: 24

Todo El Tiempo: 6,916