Repairing Canon Powershot SD790 IS Stuck Slider Button

Introducción

Remove two screws, gently pry away cover and readjust your slider button. Easy!

After removing the two screws on your strap plate, gently pry away the back cover of your camera.
Now readjust the slider button so that it is in the correct position. (You will know this works, if the button will freely move once the cover is on)

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Miembro Desde 01/30/11

372 Reputación

4 Guías creadas

CPSU-REGAN-W11S4G33

4 Miembros

5 Guías creadas