Introducción

Canon "E-18 error" happens when the lens gets stuck in the extended position. The LCD will display a little E-18 in the lower-left corner and start beeping.

Partes

No se requieren partes.

Place camera lens facing upwards on the table.
  • Place camera lens facing upwards on the table.

  • Press and hold down the power button.

  • Simultaneously press down the shutter button.

Agregar Comentario

Replace the batteries in the camera.
  • Replace the batteries in the camera.

  • To open the battery cover slide the black lever on the underside of the camera and pull the cover toward the front.

  • Remove the old batteries from the camera and wait a few moments.

  • Put in a fresh set of batteries.

  • Close battery slide and power camera back on.

Agregar Comentario

  • Put blow dryer in the "no heat" setting prior to plugging it in.

  • Plug in and turn the blow dryer on.

  • Blow air in the gaps between the lens.

Agregar Comentario

Conclusión

In conclusion, using this guide to fix the E-18 on the lens of the Canon PowerShot A80,will allow the camera to capture photos once again. To reassemble your device, follow these instructions in reverse order.

Tim

Miembro Desde 06/01/11

127 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 7-31, Regan Winter 2011 Miembro de Cal Poly, Team 7-31, Regan Winter 2011

CPSU-REGAN-W11S7G31

6 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 11

Todo El Tiempo: 3,527