Saltar al contenido principal

Remplacement des piles du clavier sans fil d'Apple

Qué necesitas

  1. Remplacement des piles du clavier sans fil d'Apple, Piles: paso 1, imagen 1 de 1
    • Utilisez une pièce de monnaie pour enlever le couvercle du compartiment où se trouvent les piles.

    What if solidly stuck? No way then to change battery it needs active.

    Sherry Lowry - Contestar

  2. Remplacement des piles du clavier sans fil d'Apple: paso 2, imagen 1 de 2 Remplacement des piles du clavier sans fil d'Apple: paso 2, imagen 2 de 2
    • Faites glisser les deux piles AA du compartiment. Vérifiez que les bornes positives et négatives soient dans le bon sens.

    Question-how can I identify age of keyboard? I have it 7+ Year’s. Keyboard isn’t responding. Trying to change Batteries-I am able to ck 2 Batteries which are chgd. But it looks like it has another one but I can not get it out….any suggestions?

    Carol Ann - Contestar

    HELP ME PLEASE

    Carol Ann

    Carol Ann - Contestar

Conclusión

Pour réassembler votre appareil, suivez les instructions dans le sens inverse.

35 personas más completaron esta guía.

Un agradecimiento especial a estos traductores:

en fr

100%

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

rab777hp

Miembro Desde 11/17/09

20,333 Reputación

3 Guías creadas

Equipo

OPEN Miembro de OPEN

Community

82 Miembros

25 Guías creadas

5 comentarios

This works great - as long as the batteries inside did not leak and create a permanent seal for the cap. I managed to get the keyboard working again by removing the batteries through the electronics compartment (remove grey center cover, slide electronics out). It did take some effort (including driving a screw into the stuck battery and yanking it out with pliers) to remove the stuck batteries and all the remains of the leakage, but I ended up with a working keyboard. Only thing is that I need to use the 'backdoor' every time my batteries need replacing, since the battery cover is permanently sealed...

Otto - Contestar

Also have a perma sealed battery cover. Poured vinegar in from middle and let soak over night. Wanna drill into coin slot to try and remove cover but need to get batteries out first. Can I just remove the one screw from logic board and disconnect ribbon cable, to have it slide out the power button end? How careful w cable? Looks like it has 2 tiny clips, do these need to be addressed or can I just pry it off?

William Shouse -

Warm the area where battery screw cover is in a stream of hot water from the faucet. Be careful not to get water into the keyboard or keys. The warmth will sometimes expand the aluminum enough to loosen the screw cover. Worked for mine.

Greg M - Contestar

Thanks!

worked well. Had to push old battery out from electronics cover area. Keyboard working again :)

tankapoet - Contestar

It’s possible, but how can I get it? I am in somali country please help me

saalix49 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 20

Ultimos 7 días: 126

Ultimos 30 días: 470

Todo El Tiempo: 97,662