Saltar al contenido principal

Partes

No se especificaron partes.

  1. Place the TV face down on a clean flat surface with the stand hanging over one edge
    • Place the TV face down on a clean flat surface with the stand hanging over one edge

    • Remove the 4 screws securing the stand to the TV

    • Use a pair of tweezers to remove screws from their recessed holes to free up the stand (A small pickup magnet works well also, if available)

    • Holding the TV so it does not slide off the work surface, pull the stand straight out of the TV

Conclusión

To reassemble your device, follow these instructions in reverse order.

12 personas más completaron esta guía.

Richdave

Miembro Desde 09/04/10

30,684 Reputación

30 Guías creadas

Equipo

Master Techs Miembro de Master Techs

Community

300 Miembros

1,006 Guías creadas

3 comentarios

What model # is this???!

E2bay.ca@gmail.com - Contestar

What MODEL is this though ?!

E2bay.ca@gmail.com - Contestar

Just got to say that it took me an 1:30 to take it off its sutch a bad design.

Modestas Mescerskis - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 159

Ultimos 7 días: 767

Ultimos 30 días: 3,479

Todo El Tiempo: 169,632