Saltar al contenido principal

TV Stand Removal

Qué necesitas

  1. TV Stand Removal, The stand: paso 1, imagen 1 de 1
    • Place the TV face down on a clean flat surface with the stand hanging over one edge.

    • Remove the 4 screws securing the stand to the TV.

    • Use a pair of tweezers to remove screws from their recessed holes to free up the stand (A small pickup magnet works well also, if available).

    • Holding the TV so it does not slide off the work surface, pull the stand straight out of the TV.

    Conviene desarmar la base retirada y volver al televisor la parte separada con sus 4 tornillos con lo que se tapa el agujero que queda en el proceso anterior.

    Gracias

    mario Baccaglioni - Contestar

    ποιο μοντέλο είναι η τηλεόραση στην φωτογραφία ;

    Michael Gerakianakis - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

20 personas más completaron esta guía.

Richdave

Miembro Desde 04/09/10

32,063 Reputación

30 Guías creadas

Equipo

Master Techs Miembro de Master Techs

Community

322 Miembros

2,528 Guías creadas

4 comentarios

What model # is this???!

E2bay.ca@gmail.com - Contestar

@e2bay Samsung LA40R81BD

Kuromi -

What MODEL is this though ?!

E2bay.ca@gmail.com - Contestar

Just got to say that it took me an 1:30 to take it off its sutch a bad design.

Modestas Mescerskis - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 58

Ultimos 7 días: 478

Ultimos 30 días: 2,152

Todo El Tiempo: 261,139