Introducción

This guide will show you how to remove the optical (cd) drive from your HP Compaq dx2000MT.

Partes

No se requieren partes.

Turn off your computer and remove the power cable by pulling it straight out of its socket.
  • Turn off your computer and remove the power cable by pulling it straight out of its socket.

Agregar Comentario

Remove the 2 Phillips #2 screws that secure the case door to the device.
  • Remove the 2 Phillips #2 screws that secure the case door to the device.

Agregar Comentario

  • Remove the side case door by pushing towards the rear of the device with your hand.

    • This may take considerable force so keep pushing!

  • Once you slide the door back, remove it by pulling it outwards from the device.

Agregar Comentario

  • Remove the side case door by pushing towards the rear of the device with your hand.

    • Once again, this may take considerable force.

  • Once you slide the door back, remove it by pulling it outwards from the device.

it’s useless my friends

bisous sur les fesses de ta mamaa

Albert einstein - Contestar

  • Remove the IDE data cable and the power cable from the optical drive by pulling away from the drive.

Agregar Comentario

  • Remove the 2 Torx T15 screws holding the optical drive in place.

Agregar Comentario

  • Remove the other 2 Torx T15 screws holding the other side of the drive in place.

Agregar Comentario

  • Remove the optical drive by sliding it out the front of the device.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Logan Pace

Miembro Desde 12/10/11

2,020 Reputación

9 Guías creadas

Equipo

Cal Poly, Team 17-16, Regan Fall 2011 Miembro de Cal Poly, Team 17-16, Regan Fall 2011

CPSU-REGAN-F11S17G16

4 Miembros

17 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 2

Todo El Tiempo: 1,210