Saltar al contenido principal

Removing the Behringer Eurolive B212D Electronics Box

Qué necesitas

  1. Removing the Behringer Eurolive B212D Electronics Box, Removing the Behringer Eurolive B212D Electronics Box: paso 1, imagen 1 de 1
    • CAUTION: Unplug your speaker from the power outlet.

    • Remove the 8 Phillips screws from the back of the speaker.

    Eurolive B212d back plate requirement

    Ashok Ahlawat - Contestar

  2. Removing the Behringer Eurolive B212D Electronics Box: paso 2, imagen 1 de 1
    • Carefully remove the back panel, lifting out the metal electronics-box with it.

    • To avoid damaging your speaker, remove slowly, as there is still a wire attached from the electronics box to the speaker.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Troy W. Weber

Miembro Desde 03/29/12

1,431 Reputación

6 Guías creadas

2 comentarios

I want to buy the hole back panel, but I don't where?, tell me

miguelangelvera63 - Contestar

I will wait for answer

miguelangelvera63 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 7

Todo El Tiempo: 3,515