Repara tus cosas Comunidad Tienda

Removing the Back Panel

Introducción

This guide will help you safely access the inside of your Lenovo A8 without fear of damaging any of the components or the exterior.

Qué necesitas

  1. Removing the Back Panel, Removing the Back Panel: paso 1, imagen 1 de 3 Removing the Back Panel, Removing the Back Panel: paso 1, imagen 2 de 3 Removing the Back Panel, Removing the Back Panel: paso 1, imagen 3 de 3

    • Place the tablet face down on a soft, stable surface that will protect the screen.

    • Next, Scrape off the seal over the screw in the back of the tablet with a Metal Spudger.

    • Use the Phillips #000 Screwdriver to remove the M1.4 × 2.5 screw.

    • If the seal covering the screw has already been removed, please proceed to the next step in the process.

    • As the screw is small, you may wish to extract it using a pair of tweezers.

    Traducir

  3. Removing the Back Panel: paso 2, imagen 1 de 3 Removing the Back Panel: paso 2, imagen 2 de 3 Removing the Back Panel: paso 2, imagen 3 de 3

    • Starting on the side, work your way around the the tablet to pop off the back cover. You will want to utilize a metal Spudger for this.

    • Some force may be required initially to pry the back cover off.

    • Note that the button tabs for this device are loose inside the case and will fall out when opening.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 2,477