Repara tus cosas Comunidad Tienda

Removing Texas Instruments TI-92 Back Cover

Introducción

Here we will show how to open the calculator. These are the basic first steps to all other guides.

  1. Removing Texas Instruments TI-92 Back Cover, Back Cover: paso 1, imagen 1 de 3 Removing Texas Instruments TI-92 Back Cover, Back Cover: paso 1, imagen 2 de 3 Removing Texas Instruments TI-92 Back Cover, Back Cover: paso 1, imagen 3 de 3

    • The first step to any repair operation is to remove the front cover.

    • Grab the back of the calculator with one hand and the cover with the other.

    • Pull the cover off from one of the sides for easy removal.

    Editar

  3. Removing Texas Instruments TI-92 Back Cover: paso 2, imagen 1 de 2 Removing Texas Instruments TI-92 Back Cover: paso 2, imagen 2 de 2

    • Orientate the calculator with the top facing towards you.

    • Slide the locking tab,found on the top part of the calculator, to the unlock position.

    Editar

  4. Removing Texas Instruments TI-92 Back Cover: paso 3, imagen 1 de 2 Removing Texas Instruments TI-92 Back Cover: paso 3, imagen 2 de 2

    • "Locking Tab"

    • To remove the back cover, slide the cover away from the locking tab towards the bottom of the calculator until the cover no longer slides.

    • Then with the front of the calculator facing down, pull up on the back cover.

    • The calculator should now be orientated with the front facing down, as shown in picture 2.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Daniel Maldonado

Miembro Desde 04/14/10

240 Reputación

9 Guías creadas

Insignias: 14

+ 11 más insignias

Equipo

Cal Poly, Team 15-51, Garner Spring 2010 Miembro de Cal Poly, Team 15-51, Garner Spring 2010

CPSU-GARNER-S10S15G51

5 Miembros

9 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 17

Todo El Tiempo: 3,290