Repara tus cosas Comunidad Tienda

Removing Playstation 2 Slimline SCPH-7500x Outer Shell

Introducción

This guide will walk you through step-by-step on how to properly remove and replace the outer shell in the PlayStation 2 Slimline.

Qué necesitas

    • Turn off the PlayStation 2 (or PS2) and carefully unplug from the power source. Check to see there are no discs inside the console before flipping the game system upside-down.

    Traducir

  2. Removing Playstation 2 Slimline SCPH-7500x Outer Shell: paso 2, imagen 1 de 1

    • Locate the six feet on the bottom of the PS2.

    • Five of the feet are in plain sight and one of the feet is located under the black void sticker on the bottom of the device.

    • IMPORTANT: Removing the black VOID sticker will void the warranty of this device. Proceed at your own risk

    • Some versions of the console, such as the PAL Version, may not have this sticker. In this case, the foot or even the screw should be in plain sight.

    Traducir

  3. Removing Playstation 2 Slimline SCPH-7500x Outer Shell: paso 3, imagen 1 de 3 Removing Playstation 2 Slimline SCPH-7500x Outer Shell: paso 3, imagen 2 de 3 Removing Playstation 2 Slimline SCPH-7500x Outer Shell: paso 3, imagen 3 de 3

    • Use a spudger, flathead screwdriver, or fingernail to pry the five visible feet from the bottom of the device.

    Traducir

  5. Removing Playstation 2 Slimline SCPH-7500x Outer Shell: paso 4, imagen 1 de 2 Removing Playstation 2 Slimline SCPH-7500x Outer Shell: paso 4, imagen 2 de 2

    • The sixth foot is located under the black VOID sticker. Remove the sticker before removing the foot underneath.

    Traducir

  6. Removing Playstation 2 Slimline SCPH-7500x Outer Shell: paso 5, imagen 1 de 2 Removing Playstation 2 Slimline SCPH-7500x Outer Shell: paso 5, imagen 2 de 2

    • After all of the feet have been removed, locate the six 4.0mm screws on the base of the PS2.

    Traducir

  7. Removing Playstation 2 Slimline SCPH-7500x Outer Shell: paso 6, imagen 1 de 3 Removing Playstation 2 Slimline SCPH-7500x Outer Shell: paso 6, imagen 2 de 3 Removing Playstation 2 Slimline SCPH-7500x Outer Shell: paso 6, imagen 3 de 3

    • Use a #1 Phillips screwdriver to unscrew all six 4.0mm screws from the base of the PS2.

    Traducir

  8. Removing Playstation 2 Slimline SCPH-7500x Outer Shell: paso 7, imagen 1 de 3 Removing Playstation 2 Slimline SCPH-7500x Outer Shell: paso 7, imagen 2 de 3 Removing Playstation 2 Slimline SCPH-7500x Outer Shell: paso 7, imagen 3 de 3

    • Once all of the screws have been removed, pull apart the top plastic cover from the bottom plastic cover. Start by lifting the side containing the power cable and Ethernet port. Then, lift the opposite side to fully separate. It will take force to pull apart the two halves.

    Traducir

  9. Removing Playstation 2 Slimline SCPH-7500x Outer Shell: paso 8, imagen 1 de 1

    • If done correctly, you should have a fully detached plastic backing, revealing the electronic components of the PlayStation 2.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

9 personas más completaron esta guía.

Autor

con 20 otros colaboradores

Jared Hirata

Miembro Desde 04/09/13

880 Reputación

7 Guías creadas

Insignias: 12

+ 9 más insignias

Equipo

Cal Poly, Team 17-4, Regan Spring 2013 Miembro de Cal Poly, Team 17-4, Regan Spring 2013

CPSU-REGAN-S13S17G4

3 Miembros

28 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 2,532