Introducción

Removing front panel to replace main LCD or small display screen.

Partes

No se requieren partes.

  1. Using the plastic opening tool, pry off the top faceplate.
    • Using the plastic opening tool, pry off the top faceplate.

    • Place the tool in the small crack that runs along the side of the phone and pry.

  2. Using the T6 Torx Screwdriver remove all 4 small screws.
    • Using the T6 Torx Screwdriver remove all 4 small screws.

  3. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Remove silver plate from phone.
    • Remove silver plate from phone.

  5. Using the spudger remove the plastic camera casing
    • Using the spudger remove the plastic camera casing

  6. Using the iPod Opening Tool remove the yellow flex cable from the green logic board.
    • Using the iPod Opening Tool remove the yellow flex cable from the green logic board.

  7. Use Spudger or hands to detach flex cable from front screen logic board
    • Use Spudger or hands to detach flex cable from front screen logic board

Conclusión

To reassemble your device, follow these instructions in reverse order.

Cecilia

Miembro Desde 11/04/10

1 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 27-96, Amido Spring 2010 Miembro de Cal Poly, Team 27-96, Amido Spring 2010

CPSU-AMIDO-S10S27G96

4 Miembros

15 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 1,802