Saltar al contenido principal

Removing Dell Inspiron 530 Processor

Qué necesitas

  1. Removing Dell Inspiron 530 Processor, Side Panel: paso 1, imagen 1 de 1
    • Place the case on its side.

    • Locate and remove the two 13.1 mm thumbscrews.

  2. Removing Dell Inspiron 530 Processor: paso 2, imagen 1 de 1
    • Slide the side panel towards the back and remove.

  3. Removing Dell Inspiron 530 Processor, Removing Processor: paso 3, imagen 1 de 1
    • Locate the processor's heat sink and fan.

  4. Removing Dell Inspiron 530 Processor: paso 4, imagen 1 de 1
    • Remove the fan's power cable from the motherboard.

  5. Removing Dell Inspiron 530 Processor: paso 5, imagen 1 de 1
    • Locate and unscrew the four Phillips #0 screws at the corners of the fan.

    • The screws will not come out completely.

  6. Removing Dell Inspiron 530 Processor: paso 6, imagen 1 de 1
    • Remove the fan and heat sink.

  7. Removing Dell Inspiron 530 Processor: paso 7, imagen 1 de 1
    • Gently press down and release the silver lever.

  8. Removing Dell Inspiron 530 Processor: paso 8, imagen 1 de 1
    • Open the metal casing over the processor.

  9. Removing Dell Inspiron 530 Processor: paso 9, imagen 1 de 1
    • Gently lift up the processor, holding by the edges only.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Note: For reassembly on step seven, make sure the corner of the processor with the gold triangle is pointing towards the release lever.

14 personas más completaron esta guía.

James Aldag

Miembro Desde 10/20/11

402 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 6-8, Regan Fall 2011 Miembro de Cal Poly, Team 6-8, Regan Fall 2011

CPSU-REGAN-F11S6G8

4 Miembros

18 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 6

Ultimos 30 días: 24

Todo El Tiempo: 8,980