Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place the laptop upside down on a clean, flat surface.
-
Locate the battery release button with the padlock symbol above it.
-
Slide the battery release button towards the padlock symbol and hold it there. Note that the button is spring loaded and will return if released.
-
Gently remove the battery from the side of the laptop.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Position the computer upside down.
-
Remove the twelve M2.5 x 8-mm screws.
-
Remove the M2.5 x 4-mm screw from the battery bay
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Position the computer keyboard side up.
-
Remove the two M2.5 x 5-mm screws from the top of the palm rest.
-
Disconnect the mouse pad cable from the main board.
-
Separate the palm rest from the base by lifting its inside edge. Start at the back center.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the optical disk drive on the bottom left hand side of the laptop.
-
Remove the single screw holding the optical disk drive in the chassis.
-
Remove the optical disk drive by gently pulling on the outer edge.
-
Equipo
Cal Poly, Team 16-2, Maness Spring 2010 Miembro de Cal Poly, Team 16-2, Maness Spring 2010
CPSU-MANESS-S10S16G2
4 Miembros
9 Guías creadas
Un comentario
This guide is incorrect, please see http://support.dell.com/support/edocs/sy... for a version that will actually take the promised two minutes.
