Removing Back Cover - Guía de reparación iFixit

Introducción

This guide will show how to remove the back cover.

Qué necesitas

Paso 1 Removing Back Cover

Removing Back Cover, Removing Back Cover: paso 1, imagen 1 de 3

Removing Back Cover, Removing Back Cover: paso 1, imagen 2 de 3

Removing Back Cover, Removing Back Cover: paso 1, imagen 3 de 3

Remove the six external screws from the camera using a Phillips #0 screwdriver.
After the screws has been removed, the bottom of the back half of the external case should be loosened from the camera.
Be careful, make sure you don't lose the screws.

Paso 2

Removing Back Cover: paso 2, imagen 1 de 2

Removing Back Cover: paso 2, imagen 2 de 2

Open the battery cover that's located on the bottom right side of the camera and carefully remove the battery.

Paso 3

Removing Back Cover: paso 3, imagen 1 de 3

Removing Back Cover: paso 3, imagen 2 de 3

Removing Back Cover: paso 3, imagen 3 de 3

Slide your fingernail or a plastic spudger in the groove from the bottom to the top right side of the camera.

Paso 4

Removing Back Cover: paso 4, imagen 1 de 1

Carefully squeeze the top right corner of the camera and pry off the external cover.
If you hear a "cracking" sound. This is normal.
Continue to pull the external cover and it will come off cleanly.
Be cautious of the flash capacitor. It carries an electrical charge, that may give you an unpleasant shock.

Paso 5

Removing Back Cover: paso 5, imagen 1 de 1

Carefully pull off the back cover, parts behind the back of the case might fall out.

Linea de Meta

3 personas más completaron esta guía.

Autor

con 11 otros colaboradores

Hasit

Miembro Desde 04/15/10

195 Reputación

2 Guías creadas

+ 7 más insignias

Equipo

Cal Poly, Team 6-17, Maness Spring 2010 Miembro de Cal Poly, Team 6-17, Maness Spring 2010

CPSU-MANESS-S10S6G17

4 Miembros

10 Guías creadas

0 comentarios

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 5

Ultimos 30 días: 25

Todo El Tiempo: 3,935