Introducción
This guide shows how to separate the GameCube's optical drive assembly from the motherboard.
Qué necesitas
-
-
Turn over the Gamecube so that the bottom side is facing up.
-
Use the 4.5 mm Gamebit screwdriver to remove all four screws.
-
-
-
-
The left side of the unit contains the cooling fan and its housing. Carefully remove the two (2) screws attaching the cooling fan housing to the unit.
-
Do not detach the red and black cooling fan wire from the main unit.(red wire)
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.