Saltar al contenido principal

Reemplazo del disco duro de Xbox One S

Qué necesitas

  1. Reemplazo del disco duro de Xbox One S, Carcasa: paso 1, imagen 1 de 1
    • Voltea la Xbox One S de manera que el fondo de la cubierta mire hacia arriba

  2. Reemplazo del disco duro de Xbox One S: paso 2, imagen 1 de 1
    • Empieza a trabajar en la carcasa en la parte trasera (donde se ubica el sticker de garantía). Inserta el abridor de plástico en el espacio entre el fondo de la carcasa y el lado superior rallado. Luego busca en medio los clips que sostienen la carcasa.

    • Usa el abridor para abrir los clips (valga la redundancia). El mejor método es hacer palanca para separar la cubierta negra del fondo.

    • Escucharás clics cuando estés abriendo la carcasa. Podría ser bastante difícil quitar la cubierta del fondo.

    • Es posible que los clips se rompan cuando quites la cubierta del fondo

    • Recomendamos empezar en una esquina y deslizar el abridor a lo largo de los ejes de la Xbox One S. Una vez que los clips se abran puedes levantar la cubierta para buscar los clips que faltan.

    Be careful not to damage the pairing button on this part

    David - Contestar

    Important!!

    You've to start from the back corner where is the information label, because there is a main clip behind a warranty sticker

    Cristian Ramirez - Contestar

    They should add this to the guide! I didnt know that, and did some minor damage to the bottom piece where that main clip is.

    I dont mind because it's my own Xbox, but what if it belonged to a customer?

    Charles Jackson -

    They should add this to the guide! I didnt know that, and did some minor damage to the bottom piece where that main clip is.

    I dont mind because it's my own Xbox, but what if it belonged to a customer?

    💯% same opinion!

    profnussecke42o -

    This was hard! I tried using plastic pry tools, but they did not work. A metal tool did, but make sure to watch a video or two, to see what you actually are dealing with. After the videos it went quite smoothly.

    Peterdk - Contestar

    I legitimately cannot open the case where the warranty sticker is, ive tried everything, im resorting to a fork to try and open this

    Sohail ツShah - Contestar

  3. Reemplazo del disco duro de Xbox One S: paso 3, imagen 1 de 1
    • Una vez que todos los clips estén abiertos, retira el fondo de la carcasa

  4. Reemplazo del disco duro de Xbox One S: paso 4, imagen 1 de 2 Reemplazo del disco duro de Xbox One S: paso 4, imagen 2 de 2
    • Usa un destornillador Torx T10 de seguridad para retirar los seis tornillos de 50 mm de largo etiquetados de F1 a F6 de la carcasa metálica

    My F3 isn't coming out. The screwdriver isn't sitting tight like it is for the other ones. Any idea on how to fix that?

    ben mccord - Contestar

  5. Reemplazo del disco duro de Xbox One S: paso 5, imagen 1 de 2 Reemplazo del disco duro de Xbox One S: paso 5, imagen 2 de 2
    • Usa el método adecuado para separar suavemente la carcasa interior de la cubierta exterior blanca

    • Haz palanca en los lados de plástico blanco hacia afuera en la parte trasera para separarlos del protector de E/S de plástico

    Essential tip: be sure to slide the metal housing backward, away from the from of the case as pictured above, rather than upward. If not, you can easily break off the teeny momentary switches on the IR blaster board!

    Mark Ross - Contestar

    “appropriate method is not descriptive like Mr. Ross’s comment. The original poster should edit the description to ensure people do in fact remove the box from the case appropriately. I would also add arrows to the picture.

    Ryan A - Contestar

    ____________⬆️

    ↖️Yes! I see it the same way!↗️

    ⬅️Arrows are always a good thing!➡️

    ↙️Can't do anything wrong with them! ↘️

    ____________⬇️

    😅😅

    profnussecke42o -

    I didn't realize that metal ribbon was connecting the case to the console and I yanked it w out realizing it was there. How o I get a replacement?

    Jerianna Mike - Contestar

  6. Reemplazo del disco duro de Xbox One S, Panel superior de la carcasa interior: paso 6, imagen 1 de 1
    • Voltea la carcasa interior de modo que el ventilador mire hacia arriba

  7. Reemplazo del disco duro de Xbox One S: paso 7, imagen 1 de 1
    • Para acceder al hardware dentro de la carcasa, puedes levantar el panel superior de la carcasa. Debería salir fácilmente.

  8. Reemplazo del disco duro de Xbox One S, Ensamble del disco duro: paso 8, imagen 1 de 2 Reemplazo del disco duro de Xbox One S, Ensamble del disco duro: paso 8, imagen 2 de 2
    • Para reemplazar el disco duro, voltea la consola y retira los dos tornillos T10 Torx de 10mm (C3 y C4) de la parte trasera de la Xbox One S

    • Esto permitirá que la cubierta de plástico que rodea al disco duro se separe del resto de la consola

    Some of my silver were gold screws, so just letting people know to look out for that!

    jovialkitten - Contestar

    The Torx screw circled on the left is actually C5

    Jaryn Wickman - Contestar

    I found the same. On my Xbox One S, it's C3 and C5 that hold in the hard drive caddy. C4 holds in the optical disk caddy.

    jamesr -

    Yeah, C3 and C5 on my console too.

    Jahn Roux - Contestar

    Funny thing on my console rev t t3 built feb 2018 it’s C4 and C5

    KingofRome - Contestar

    The instructions fail to mention that the top metal cover can be lifted off at this point without undoing any more screws.

    CityZ - Contestar

  9. Reemplazo del disco duro de Xbox One S: paso 9, imagen 1 de 3 Reemplazo del disco duro de Xbox One S: paso 9, imagen 2 de 3 Reemplazo del disco duro de Xbox One S: paso 9, imagen 3 de 3
    • Desconecta suavemente el disco duro de la tarjeta madre (en los dos cuerpos conectores de plástico

    Do not disconnect the connector in the second image! There are tiny prongs that bend easily and if bent just a tad bit they will break off. I had first hand experience with this and I ended up breaking my Xbox because I could not put that cable back on.

    [deleted] - Contestar

    Do not remove the cable!!!! You can change while the cables are plugged. It took 2 hours trying to put mm precisely all the little pins because of the removal of the cables.

    Please update the post, I could easily end up as the Aaron, breaking the XBOX completly.

    Botond Kopacz - Contestar

    Yes, this has also happened to me the connectors had broken and the pins bent and snapped off.

    Samuel Garbutt - Contestar

  10. Reemplazo del disco duro de Xbox One S, Disco duro: paso 10, imagen 1 de 1
    • Quita los cuatro tornillos Torx T10 negros de 10 mm del soporte de plástico negro.

  11. Reemplazo del disco duro de Xbox One S: paso 11, imagen 1 de 2 Reemplazo del disco duro de Xbox One S: paso 11, imagen 2 de 2
    • Separa el soporte de plástico negro y los cables del disco duro.

    do you need to download anything on the hdd before you put it in or can you just put it straight in

    Jamie Amor - Contestar

    I really wish there was an answer to this question. Im also wondering

    Steven Estep -

    Yes to do that follow the Gide on the Xbox one s repair Gide.

    Seani M -

    You will need to copy the is or use a sub device with the is on it if you plug in the new had it should show you what you need to do

    Ahmad Bilal - Contestar

    Well they have a full Gide on the Xbox one s repair page

    Seani M -

Conclusión

Para volver a armar tu dispositivo, sigue estas instrucciones en orden inverso.

110 personas más completaron esta guía.

Un agradecimiento especial a estos traductores:

en es

100%

¡ Angel nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Andrew

Miembro Desde 04/26/17

5,144 Reputación

3 Guías creadas

Equipo

Cal Poly, Team S22-G3, Livingston Spring 2017 Miembro de Cal Poly, Team S22-G3, Livingston Spring 2017

CPSU-LIVINGSTON-S17S22G3

4 Miembros

56 Guías creadas

14 comentarios

Just swapping like this, will the xbox automatically install the os and drivers or do you need to download them with a computer prior to installation?

James Pedigo - Contestar

The drive requires formatting and some moderate configuration with a windows 10 PC prior to installation. I just installed a 500Gb SSD in my console yesterday. I will be creating a detailed guide soon.

MervDervis -

Just finished this guide for installing the firmware.

Instalar firmware en Xbox One S

KimJongIan -

Following this guide to upgrade the 500GB HDD to a 2TB SHDD worked just fine. You'll need to download some script to be able to format the larger HDDs to be able to access the larger available space on the Xbox - YouTube is your friend here.

Reinstalling the OS seemed to be simple enough. Until you realise that the bootanim file is missing. Taking out the HDD is required to put this file on via Windows.

Until Microsoft release a new update, of which the console was unable to update via internet. So I reverted to use a USB flash drive to perform an offline update, which was successful. BUT… the bootanim is again rendered missing. Not too sure if I fancy repeating the tear down again and again after every update. Doubt the clips of the underside of the console can handle such a beating…

David T - Contestar

Thank you for adding this. I wan unsure what the next process was but I found it on YouTube.

William Mills -

What is the max internal drive capacity of the XB one S?

l azu - Contestar

Missing the most important part! Installing the Xbox OS on the hard drive

Richard Cruz - Contestar

Step 5 (removing the port cover) is unnecessary. The drive slides right out and back in with the port cover in place.

Tom Maynard - Contestar

how much will it be if i give yall a brand new hardrive and yall script ad dowload the files for a xbox one s?

cody - Contestar

I was able to get the software on the drive using the offline update tool from the Microsoft website. It installed on the Xbox using a USB drive.

Chris Turgeon - Contestar

I saw a post on redit that said that running scripts to format the drive before installation are no longer required, anyone know if this is true?

Nick Scholefield - Contestar

I can confirm this works. I JUST did this today, with a 2TB hard drive I got for amazon. I got it for the PS4 but realized I had more xbox games I wanted to store. I didn't format the drive on windows first, I just swapped the hard drive for the old one immediately, used an 8GB thumb drive with the offline OS update - from here: https://support.xbox.com/en-US/help/hard... - and it worked! When you turn on your XBox with the new drive you will get an error code. Click the second option to troubleshoot with update(says something like that) then with your USB in your xbox do an 'offline update'. Your xbox will restart several times and it will work like a brand new xbox.

Christian Shaw -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 90

Ultimos 7 días: 545

Ultimos 30 días: 2,414

Todo El Tiempo: 209,352