Saltar al contenido principal

Introducción

Esta guía te enseñará cómo reemplazar o actualizar el disco duro solido (SSD) en tu MacBook Pro 15" Pantalla Retina Mediados 2015.

  1. Quitar los siguientes tornillos P5 pentalobe que sujetan la caja inferior del  MacBook Pro:
    • Quitar los siguientes tornillos P5 pentalobe que sujetan la caja inferior del MacBook Pro:

    • Ocho 3.0 mm

    • Dos 2.3 mm

    The number of screws listed here is wrong on my model. I had four of the smaller size.

    anonymous 1286 - Contestar

    Just to add to my comment above (I can't edit it because it's anonymous), my MacBook Pro is a mid-2015 15in model 2.8GHz (A1398; EMC2881). For the bottom case it uses six 3.1mm screws, and four 2.3mm screws at the clutch/hinge side of the MacBook Pro. I tried using a 3.1mm screw at the clutch/hinge end, as described in the main article, and they don't fit. It has to be four 2.3mm screws.

    anonymous 1286 - Contestar

  2. Levantando desde el borde más cercano a la articulación de la tapa, levanta la caja inferior del MacBook Pro. Levantando desde el borde más cercano a la articulación de la tapa, levanta la caja inferior del MacBook Pro.
    • Levantando desde el borde más cercano a la articulación de la tapa, levanta la caja inferior del MacBook Pro.

  3. La caja inferior tiene dos clavijas de plástico (rojo) que entran en dos clips de plástico en la caja superior (naranja). Durante el reensamblaje, empuja suavemente hacia abajo el centro de la caja inferior para volver a fija la caja a sus dos clips de plástico. Durante el reensamblaje, empuja suavemente hacia abajo el centro de la caja inferior para volver a fija la caja a sus dos clips de plástico.
    • La caja inferior tiene dos clavijas de plástico (rojo) que entran en dos clips de plástico en la caja superior (naranja).

    • Durante el reensamblaje, empuja suavemente hacia abajo el centro de la caja inferior para volver a fija la caja a sus dos clips de plástico.

    pretty hard to put it back, so I just remove the clips on the upper case....

    jamiegan835 - Contestar

    The trick to putting it back on is to guide your fingers to the same level as the clips, and then when you put the case down move your hand from the left side of the case to the right side of the case; applying pressure when you reach the area where the clips are.

    Aaron Freidus - Contestar

  4. Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora

    Kits de Reparación de Android

    Estás a un kit de tu nueva pantalla o batería.

    Comprar Ahora
  5. Retira la etiqueta de advertencia que cubre el conector de la batería
    • Retira la etiqueta de advertencia que cubre el conector de la batería

    You only need to remove the tape to the edge of the flap. This is enough to be able to pry the battery connector up.

    Aaron Freidus - Contestar

    +1 to above comment

    Andrew Saunders - Contestar

    Note that the photo is taken from the hinge side - the other way to the photo in step 3

    Toby Thurston - Contestar

    I chanced it, didnt disconnect the battery and all is well even after giving the insides a good vacuuming before changing the SSD.

    Dermot O Logical - Contestar

  6. Usando el extremo plano de un spudger, levanta suavemente el conector de la batería directamente fuera de su zócalo en la placa lógica. Dobla los cables de la batería hacia afuera y fuera del camino, asegurándose de que el conector de la batería no entre en contacto accidentalmente con la placa lógica. Dobla los cables de la batería hacia afuera y fuera del camino, asegurándose de que el conector de la batería no entre en contacto accidentalmente con la placa lógica.
    • Usando el extremo plano de un spudger, levanta suavemente el conector de la batería directamente fuera de su zócalo en la placa lógica.

    • Dobla los cables de la batería hacia afuera y fuera del camino, asegurándose de que el conector de la batería no entre en contacto accidentalmente con la placa lógica.

    why is this necessary to remove a hard drive?

    Lawtay - Contestar

    @lawrencetaylor On any electronics repair, you need to disconnect all sources of power before you start. It’s a basic safety precaution and also removes the risk of accidentally shorting a connection somewhere (which can potentially kill your MacBook).

    Jeff Suovanen -

    I chanced it, didnt disconnect the battery and all is well even after giving the insides a good vacuuming before changing the SSD.

    Dermot O Logical - Contestar

    Picture doesn’t match the computer. Hard to tell which connector to disconnect

    James Mitchell - Contestar

    Hi James, are you sure you have the correct guide for your machine? Try using our MacBook Identification tool.

    Sam Goldheart -

    Habe den Akkustecker beim putzen abgemacht um keinen Stromschlag zu kriegen, jetzt wieder eingebaut. Nun habe ich folgendes Problem: Akku wird geladen, aber steigt niemals ueber % und manchmal geht er trotz Anschluss an das Stromnetz einfach aus. Hat da jemand eine Idee?

    paul - Contestar

    I used the identification tool and can confirm what James is seeing. The picture doesn’t match for this step. There is no piece with visible holes punched in it.

    Joshua McFarland - Contestar

  7. Remueve el único tornillo Torx T5 de 2.9 mm asegurando el SSD a la placa base.
    • Remueve el único tornillo Torx T5 de 2.9 mm asegurando el SSD a la placa base.

    Bonjour,

    voila j’ai un soucis, après plusieurs tentative avec différente marques de tournevis impossible de la dévisser je ne comprends pas

    miss.reira - Contestar

    This one is T6 on my Mid-2015 MBP.

    dja - Contestar

  8. Levanta el extremo del SSD lo suficiente para que pase sobre el altavoz que está directamente detrás de él. No levantes el SSD muy alto, o podrías dañar los pines o el zócalo. Tira del SSD fuera de su zócalo en la placa lógica.
    • Levanta el extremo del SSD lo suficiente para que pase sobre el altavoz que está directamente detrás de él.

    • No levantes el SSD muy alto, o podrías dañar los pines o el zócalo.

    • Tira del SSD fuera de su zócalo en la placa lógica.

Conclusión

Para volver a montar tu dispositivo, siga estas instrucciones en orden inverso.

145 personas más completaron esta guía.

Un agradecimiento especial a estos traductores:

100%

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Sam Goldheart

Miembro Desde 18/10/12

388,177 Reputación

545 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

107 Miembros

9,417 Guías creadas

So guys, I got a couple of questions:

1. Is this model (MBP Retina Mid 2015/MacBookPro11,4 ) really upgradable? https://www.datenreise.de/en/macbook-pro... says otherwise.

2. Samsung 850 EVO or Samsung 850 PRO would work with the model mentioned above?

Eduardo Delai Correa - Contestar

Yes, it is upgradeable. At the time that article was published there was no drive on the market that would work. Now there is. No the Samsung 850 EVO or Pro would not work. As far as I know OWC is the only one that produces an after market drive that is compatible.

Chris Matlock -

I couldn't find the SSD that Chris mentioned. Would you please point out the exact model?

Jerry Zhong -

It’s the OWC Aura Pro X2, you can get it all the up to 2TB.

Stephen Agnew -

I think you could purchase a pcie to M2 adapter and fit a Samsung 950 Pro in there. 960 Pro is coming out soon though with higher performance.

tonynca7 - Contestar

I also wanna try the 960 pro on, but I have read an article about the 3rd party SSD support which saying OS X deny to boot from a 3rd party NVME drive, you have to do some hack before you can use it. Is it true?

cyl19910101 g -

how i can upgrade mt MacBook pro with retina mid-2015 ?

is Samsung evo 850 fit with my computer

Thanks

Turki - Contestar

I own a rMBP 15 w/ radeon 15" (w/ the radeon gpu) and pleeassee correct me if I'm wrong but i gotta feeling my SM0512G might be on the brink of failure.I do realize the low probability of such but I'm quite the power user and i've also had some problems with macOS sierra which have led me to "gpt > destroy" the part map 3x.

To be perfectly honest , I'm sh*ttng my pants out scared of running smart mont or whatever 3rd party tool in order to check its current wear levels;

- given that last time i did (couple of months ago - before the whole macOS issues) the wear was at 67%....

There have been no noticeable signs of degraded performance...but sometimes when i boot him up there does seem to be some graphics issues (such as they watch/clock being blacked or greyed or the occasional odd flickering of system issues (they're kinda hard to describe).

not sure what to do. Looking to replace the ssd but the one sold by owc is quite inferior (spec-wise) in comparison to the original.

Any thouhgts/recomendations?

Thx!

milanf11 - Contestar

which SSD is recommended, the OWC or this one..http://store.mcetech.com/mm/merchant.mvc...

If there are an better after market SSD than the 2 listed please let me know

Manveer Dhillon - Contestar

Hello~

I want to change my Macbook pro 15" SSD

Is M.2(Pcie) Suitable for MacBook Pro 15" Retina Display Mid 2015?

If I use INTEL SSD is Suitable too? or it just can use SAMSUNG?

Thank you so much!!!!!!

IFIXIT is awesome!

hahaloveya20 - Contestar

Hi Everyone, I Seem to Be Having This Folder Icon with a Question Mark inside whenever I Try To Boot my Macbook Pro mid 2015 Edition. Could It be the 1TB ssd inside or Somethings else. Pls Someone should Help me. Thnx

Victor - Contestar

Hey try this solution that i’ve researched

Try checking the disk if it has a problem by holding command + r while holidng the power button.

After you see the Apple logo, release the power button, and keep holding the command + R.

Once you saw the macOS utilities open the disk utility and click your MacBook Pro’s SSD.

Check if the S.M.A.R.T status says that it’s “Verified

*If the S.M.A.R.T status of your SSD has anything other than verified on your MacBook Pro, there could be a problem on your SSD or the SSD cannot be detected

*If the S.M.A.R.T status of your SSD is verified continue following these steps.

Nathan Ingalla -

In disk utility, click a drop down arrow on it, Click the OS partition and click First Aid.

If the First aid couldn’t fix the problem, wipe your boot drive by clicking the erase function on it and set the file system as MacOS Extended (Journaled) and click erase.

After the wiping is complete, connect your MacBook to the internet and exit disk utility.

Once you closed the Disk utility, click the reinstall macOS and wait the reinstallation

(Note: Installation time may depend on your Mac and Internet Speed.)

After the reinstallation is complete, you will need to set up your user account and re-enter your iCloud credentials if you have.

Nathan Ingalla -

OK, need a part number (amazon would be great) for a compatible 1T & 512GB for my mid 2015 15" MB Pro...

Steven Machado - Contestar

Is disconnecting the battery necessary just for a HDD change? Or is it here for informational purposes only?

Rob Benton - Contestar

Rob Benton - Better be safe that sorry. Always disconnect the battery.

Oros - Contestar

Hi their if I follow the instruction above I will obviosly restart my mac within the Time Machine that I have already made. Is it simple afterwards I just have to follow presidure.??? Tanks for your Help ….Simon

simon - Contestar

Question would the Samsung 860 evo work?

Jason Rose - Contestar

Has anyone tried to use an M.2 EVO 860 with 2TB capacity from Samsung yet? Any experiences made so far? Does it work without problems with OS X Sierra? Any comments would be helpful.

Yorh Ekin - Contestar

EVO 860 is SATA, it will not work. Macbook pro needs nvme ssd. Just finish my upgrade using ADATA SX8200NP 960GB (ASX8200NP-960GT-C), and adapter is from Amazon, “Sintech NGFF M.2 nVME SSD Adapter Card For Upgrade 2013-2015 MacBook”. Both works like charm. Only issue is that SMART status is unavailable.

Hao Li -

Hi,

It seems there are two options currently on the market:

OWC Aura OWCSSDAB2M05 or -10 for 500GB or 1TB versions, respectively, and

Transcend TS480GJDM850 for 500GB (or TS960) for 1TB versions.

Does anyone have experience with the speed of these? I read that they are 33-50% slower. I’m guessing using an M2 with adapter is also a solution but probably even slower.

And I guess all of these are about double the price of regular SSDs if my research is correct.

MacFlo - Contestar

would a Crucial® MX500 Solid-State-Drive M.2 fit in ? or what would the best ssd be?

theoctopusride - Contestar

I used the crucial P1 SSD 1TB PCIe and adapter board and installed the MacOS Mojave and WINDOW10, which functions properly

juan chang - Contestar

Hi

I have a MacBook Pro mid 2015. I swapped it’s original 1TB for a 2TB. Two models I tried works:

The Hat SSD I got for around $ 350 on Ebay

The Samsung 960 Pro M2, with a Synthech adapter. It’s about three times the price of the Hat SSD… But the Samsung is also close to twice as fast as the original Apple SSD on my Black Magic Disk Speed test.

Be aware that the OWC external boxes DO NOT WORK for SSDs other than OWC and Apple. You have to plug the SSD to the mother board to test them (Samsung + Synthech adapter work)

You also have to run either Mojave or High Sierra.

fcapeilleres - Contestar

does this SSD work with a macbook pro retina 15 inch 2015 model? Samsung MZ-76P2T0B/EU 2 TB 860 Pro Sata III 64L V NAND Solid State Drive

Its Riyana - Contestar

Hi guys! Will the Apple 256gb SSD that I pulled from my Mid 2015 Macbook Pro fit in a PCIe adapter card which I want to use in a Mac Pro 5,1? I read that the Apple slot on the MBP is proprietary which usually means no. But here is the card I am considering: '''https://tinyurl.com/y3mrr8tt'''

If not that card, can you recommend one?

Art Vandelay - Contestar

would a Samsung 970 PRO 1TB (MZ-V7p1T0BW) fit in ? ''I got the adaptor for the SSD. or what would the best SSD be?

I would know isn’t it have a chance will let the computer can not wake again after sleep mode? ( after reboot will to be normal ) after install the new SSD?

Dante Suen - Contestar

It's really helpful

Jeet singh

Jeet singh - Contestar

Hi. Is this for an A1502? My first MacBook repair but I’m sure I can do this. I see you sell the tools, ur do you sell the Retina display also? I believe it is the entire top half of laptops including g case.

Thanks.

Todd

Todd Taylor - Contestar

Hi Todd—The A1502 designation covers models from Late 2013 - Early 2015. You might want to start over here, select your specific model, and then click through to the appropriate guide. We do stock complete displays for most models. Good luck!

Jeff Suovanen -

SSD that works with this as a replacement: OWC Aura Pro X2, you can get it all the up to 2TB.

Stephen Agnew - Contestar

Añadir comentario

Ver Estadísticas:

Past 24 Hours: 209

Past 7 Days: 1,529

Past 30 Days: 6,087

Global: 209,417