Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Este procedimiento paso a paso permitirá llegar y reemplazar la unidad óptica responsable de leer el disco. Ten en cuenta que cualquier reemplazo o desmontaje más allá del disco duro, anula la garantía de Sony.

Resumen del Video

  1. Voltear el PS4 en su parte superior.
    • Voltear el PS4 en su parte superior.

  2. Remueve las cuatro pegatinas en la parte posterior de la PS4. A pesar del alarmante aviso de la pegatina, Sony no puede anular tu garantía legalmente por quitarla, solo si dañas tu dispositivo.
  3. Retira los tres tornillos T9 Torx de 9 mm en la parte posterior del sistema.
    • Retira los tres tornillos T9 Torx de 9 mm en la parte posterior del sistema.

  4. Retira el panel inferior levantando la pieza frontal hacia arriba y deslizando el panel hacia la parte posterior.
    • Retira el panel inferior levantando la pieza frontal hacia arriba y deslizando el panel hacia la parte posterior.

  5. Quita los tres tornillos T9 Torx de 9mm.
    • Quita los tres tornillos T9 Torx de 9mm.

    • Quita los dos tornillos Phillips # 1 de 4 cm.

  6. El kit de herramientas esencial

    Las herramientas más útiles en nuestro kit más compacto.

    Compra ahora

    El kit de herramientas esencial

    Las herramientas más útiles en nuestro kit más compacto.

    Compra ahora
  7. Levanta hacia arriba la fuente de alimentación.
    • Levanta hacia arriba la fuente de alimentación.

  8. Retira el conector de 5 alambres que se conecta de la fuente de alimentación a la placa madre. Ahora puedes quitar completamente la fuente de alimentación del sistema.
    • Retira el conector de 5 alambres que se conecta de la fuente de alimentación a la placa madre.

    • Ahora puedes quitar completamente la fuente de alimentación del sistema.

  9. Desconecta el cable plano de la unidad óptica presionando hacia abajo la lengüeta de liberación de metal y tira suavemente del cable plano. Esto no debe requerir fuerza.
    • Desconecta el cable plano de la unidad óptica presionando hacia abajo la lengüeta de liberación de metal y tira suavemente del cable plano. Esto no debe requerir fuerza.

  10. Desconecta el mismo cable plano de la placa madre; asegurándote de que está presionando hacia abajo en la pestaña de liberación de metal y tirando suavemente del cable plano.
    • Desconecta el mismo cable plano de la placa madre; asegurándote de que está presionando hacia abajo en la pestaña de liberación de metal y tirando suavemente del cable plano.

  11. Retira el cable de antena wifi conectado a la placa madre.
    • Retira el cable de antena wifi conectado a la placa madre.

  12. Quita el enchufe de cuatro cables de la unidad óptica de la placa madre tirando hacia afuera.
    • Quita el enchufe de cuatro cables de la unidad óptica de la placa madre tirando hacia afuera.

  13. Quita los cuatro tornillos de 9 mm Torx T9 conectados a la antena wifi y la unidad óptica.
    • Quita los cuatro tornillos de 9 mm Torx T9 conectados a la antena wifi y la unidad óptica.

    • Retira el tornillo Phillips # 1 de 5 mm.

  14. Levanta y retira la antena wifi.
    • Levanta y retira la antena wifi.

  15. La unidad óptica puede ahora levantarse hacia arriba y retirarse del sistema. No descartes la placa hija. Ten en cuenta que la unidad óptica está "enlazada" con la placa madre. Si necesitas reemplazar tu unidad óptica debes quitar la placa madre de la unidad óptica original e instalarla en la unidad que deseas instalar en su PS4.
    • La unidad óptica puede ahora levantarse hacia arriba y retirarse del sistema. No descartes la placa hija.

    • Ten en cuenta que la unidad óptica está "enlazada" con la placa madre. Si necesitas reemplazar tu unidad óptica debes quitar la placa madre de la unidad óptica original e instalarla en la unidad que deseas instalar en su PS4.

Conclusión

Para volver a montar el dispositivo, sigue estas instrucciones en orden inverso.

142 personas más completaron esta guía.

Un agradecimiento especial a estos traductores:

35%

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Sam Omiotek

Miembro Desde 25/02/19

9,580 Reputación

71 Guías creadas

Equipo

iFixit Miembro de iFixit

Community

131 Miembros

13,434 Guías creadas

This was a great help after my 2 yr old put a coin in my PS4. However when following the steps backwards I got to step 7 which says 'Remove the 5 wire plug attached from the power supply to the motherboard' & couldn't see how to reattach it. I then noticed it looks like I've pulled the whole plastic white casing/plug holder (within the orange rectangle) off the mobo rather than just the plug from the casing. Although the pic looks like the plastic casing does come off the mobo as it's at an angle (maybe why I pulled the whole thing out or maybe I did it right).

I'm thinking I've made a mistake is because now I cant see anywhere that I can 'plug' the 5 L shaped wires on the bottom of the plastic casing back onto the mobo. Plus where they used to be attached there's now 5 tiny silver rectangles on the mobo (2 opposite 3), so I guess these 5 wires were some how adhered to those mobo rectangles by a conductive adhesive of some sort.

Any suggestion for the best repair method would be appreciated.

Thanks

doc browejnn - Contestar

If you've pulled the female end from the motherboard the it need to be resoldered to the board, most likely gonna need to pull the motherboard. It's a very simple connector, sounds as if you yanked the whole thing off.

lynx2069 -

Is anyone there who try to change the optical drive without change the Motherboard in the same time ? And does it run ?

Thanks for your help.

Frederic Morelli - Contestar

How about a guide for replacing just the laser unit instead of the whole drive?

david.walker52 -

Would this fix the disc ejection issue?

Tim - Contestar

No, as the issue isn't attributable to the drive itself. The issue is the capacitive eject button and the rubber foot on the bottom of the console. The foot expands with the heating and cooling cycles of the machine, and can set off the button just by making any contact at all. I suggest removing it, cutting off the front 1/8", then reinstalling it. That's what worked for me.

Nathan Rice -

This is very useful, however in order to play a new Optical drive a married motherboard must be installed also. Since the these are not plug and play drives.

Fueled by Rage - Contestar

Thanks for your help.

Frederic Morelli -

I don't know which one of these to fix my Playstation 4 works fine until I put a disk in it it just says corrupted data it turns on fine the Internet works fine but games movies nothing works please someone tell me how to fix this

Samantha price - Contestar

Sounds like the connector fron the disk drive to the motherboard may not be fully connected.

UnicornsOnLSD -

I recently got a PS4 form a relative that was a busted disk drive because he spilled water on it. the repair man said that the drive controll board is dead bacause foo water damage. What do i do? buy a new whole dirve or will that not work because of MARRage

Daniel Anishchenko - Contestar

I wonder what I could damage. I used tutorial from yt.

Console works, games are running without problems, it is silent after new thermal paste.

But blue ray is dead: - not responding when pressing bottom eject button. - not reading already inside cd. - not accepting any cd - no option to eject from controler options

I wonder what could go wrong. Some cable? Something wrong with this small board that is next to blue ray?

I see small board, 1 4-pin connector, 4 tapes( 1 from motherboard, 3 from blue ray). Everything connected but not working.

Anyone has some clue how I can fix this or investigate?

Lukasz Z - Contestar

I have the exact same problem, I cleaned my very dirty PS4, applied the arctic MX-2 thermal compound, put everything back together. When I fired the PS4 back on the Blu-ray drive doesn't do anything., won't take any discs, the eject button does nothing.

Were you able to fix yours? How did you do it? what was the problem? If not.... can anyone help us both?

Haris -

I have the exact same problem :((((

my Blue ray drive is dead

Ali -

When you remove the blu ray drive one of the most important steps to replacing it (and one that most instructions fail to mention) is the two metal tabs on the drive that hang over the back and left side. Starting withe the rear of the drive make sure the silver tab that hangs off the back slips over the plastic ridge and do the same with the other silver tab on the left side. The first time i tried to clean my optical drive i just popped it in without making sure these two tabs were in the proper position and it was as if there was no power being supplied to the drive.

Casey Jonason -

Hi! My son put a coin in the optical drive, how can I put the coin out doing this? sorry for my english im from spain, i need help

Diana M Da Silva Henriques - Contestar

when i am trying to find an optical drive for my ps4 its says there are 2 types which do i need and hwo would i know which one i need

kerim pala - Contestar

this s the same problem i am having can somebody help us. it would be muchly appreciated tnx

LEEDS -

Changed my ps4 blue ray disc drive with mother board cause my son put multiple games in. Ordered and installed new one but now it will not recognize cd or game when inserted. Do i have to sync new disc drive to ps4 or does it automatically do it? Please help

dagucc - Contestar

I installed new optical disc drive and now my ps4 will not recognize any disc or game. Wat to do?

dagucc - Contestar

Okay, why is the system automatically flagging my reply to someone as spam?

Nathan Rice - Contestar

I had this problem where I didn't press the release tab on the mother border and the flex ribbons ends got cut off . could this be the reason why my drive doesn't even accepttdisks anymore ?

claudio - Contestar

I went step by step replaced the drive and now there is no power. It was working fine when I took it apart now nothing... I've gone back over it 3 times... Power supply's just don't die like that do they?

Mike - Contestar

I'm in this same boat. Bought two optical drives, and when installed the Playstation 4 won't turn on, with the old one it turns on but the disc sensor doesn't work and won't receive discs...

Did you solve your problem?

RobertoLL -

I NEED HELP!!!

I TOOK APART MY PS4 TO REPLACE MY FAN, WHICH WAS SUCCESSFUL. BUT THEN ALL THE SUDDEN MY DRIVE WILL NOT WORK. IT JUST GIVES KE AN ERROR MESSAGE. WENT BACK THROUGH AND MADE SURE EVERYTHING WAS CONNECTED PROPERLY AND IT IS. I FEAR SOMEHOW THE DAUGHTERBOARD GOT MESSD UP. I NEED TO SPEAK WITH SOMEONE FAMILIAR WITH THE ISSUE AND IM WILLING TO COMPENSATE SOMOEN WHO CAN POINT ME IN THE RIGHT DIRECTION.

I CN BE REACHED AT chooseloveorfear@gmail OR TEXTED AT 602#429#9236. THANKS!!!

Paul - Contestar

I have a problem! i bought a bdp-020 wich is the one that was inside my console! but when i try to play something i got this error "CE-35888-2" and when i tried to update i got this one "e-ffffffff " help me please.

i follow the step by stem video on youtube. but isnt working!

Mauri Rios - Contestar

Your bleuray board is married to your motherboard if you want to Let it workshop again you have to place your old bord frame your bleuray

Ws -

Ook nl mensen hier?

Ik had problemen met mijn bleuray hij accepteert geen disk meer. Reset ect gedaan restore data ect. Niets

Heb een nieuwe bleuray gekocht en oude printplaat omgezet op mijn nieuwe bleuray. Nou hij is 5 dagen goed geweest en krijg het zelfde gedonder weer reset niets werkt iemand een idee?

Ws -

Thanks i was trying to find my model optical drive for so long as a replacement for my current one but after seeing your awareness comment at the end then i'm guessing that i can just buy any new replacement optical drive i just need to take the motherboard off of my current one and put it on the new one is that right ?

Reaper666 - Contestar

Do i need to find my model optical drive and put the motherboard off of my current one onto that one or can i buy any model optical drive and put the motherboard off of my current one onto that one ?

Reaper666 - Contestar

Yeah that's what I need to know does anyone have the answer?

zane akhter -

So quick question. By married motherboard do you mean the board that is on the optical drive itself or are you referring to the whole system board of the PS4? If I bought a new disc drive online and swapped out the disc drive motherboards would that work? Any soldering required, or simply remove some screws? Thank you for your help, just need a quick answer!

Cyology.IO - Contestar

My PS4 is doing the thing where it's constantly trying to eject a disk that isn't in there. It had been doing this for a long time so I tightened the manual "eject" screw, turned it on it's side, removed the rubber foot, unplugged it from the way and let it sit for 10 mins, etc (pretty much everything on the interwebs) this worked for a a few months but it's back to it's old habits. Am I able to just removed the optical drive? All my games are digital copies anywho and having the optical drive has just been annoying (it's now at the point where it ejects every 30 seconds) due to the ejection noises and the beeping.

Harrison - Contestar

Yeah I'm with you. I've tried all that and more. Turning the manual eject screw seemed a temporary fix but even that doesn't work now. Still beeps and ejects. That's why i'm here. Will it help to replace the drive entirely or not? Seems not. I'm mostly digital but I still do have a need for the optical drive.

shabznet -

So the motherboard that is on the old blue ray disk drive do you need to put that on the new one or do I have to buy another one?

zane akhter - Contestar

Hi how do I determine which disc drive I have to replace with the same as there are different ones out thrre

stevec5238 - Contestar

I bought the new bluray drive, switched over the mother board, and now I can't insert a disc. It's almost as though there's no power to the drive.

James Brogan - Contestar

Could anyone help me.

I tried to change the drive board and somehow broke the big ribbon cable.

Now the disc won't spin anymore.

AlessioM - Contestar

I removed my old disc drive because it wouldn't accept discs at all. It wouldn't even make a noise....almost like it was just DEAD. So I bought a brand new blu Ray optical drive for the PS4 and I removed the old one and installed the new one. I removed the motherboard from the old and screwed it onto the new one. I am sure I've installed everything like it should be but when I go to insert a disk.... I GET THE EXACT SAME RESULT!!!! No noise and it won't accept the disc. Please help if anyone can think of something I might have forgotten to do or overlooked.

gilleytopher@gmail.com

gilleytopher - Contestar

Hello I have a problem I have damaged my optical disc drive and the logic board is there anything I can do

Jason - Contestar

I just don't underatand, I bought another optical drive with a new laser installed and I took out the optical mother board from the new drive replacing it with the original one and I still get un recognized discs and I know for a fact it's the optical drive mother board because I tested the new optical drive with it's mother board and I could play blue rays but not ps4 games which gave me an error pretty much saying not compatable. I swapped back to the original optical mother board and pretty much back to normal again, not recognizing discs and I checked everything, even the rollers. I just don't get it, I always had back luck with play stations. I don't think anyone had changed it before and therefore the optical mother board should still be original, so what's happening here?

Deeb - Contestar

If you bought a married drive and mother board, would they then run together?

Todd Law - Contestar

To anyone whats haveing tecnical issues wtever is search jase12354 on facebook send as post will reply a soon as i can profile is v for vendette

Jason - Contestar

You guys are using a total different kinda of PS4 I have .. My blu ray isn’t married to my motherboard .. And now I dont know how to fix this error ..

Betty Sales - Contestar

So how do I marry a new disc drive with the original blue ray logic board??? Naturally to replace a functioning logic board when only the old warn out drive itself seems like a waste of $160.

Todd Ashelman - Contestar

have a ps4 cannot get a part which is the disk detection sensor kld-003 can get kld-002 and kld-001 but cannot find find kld-003 anyone with the same problem.

stuart - Contestar

I recently took apart my ps4 to replace the thermal paste and since putting it back together the drive will not eject via the button on the ps4 and will not accept a disc.

I can eject the disc via the on screen menu so there is power and I can also hear the drive churning away when I turn the unit on.

Any ideas?

J P - Contestar

After I completed all the directions in reverse. For the drive to actually read a disc, I had to do an update. Now the eject button doesn't work. No clue what is wrong or how to fix it.

Kyle Roberts - Contestar

Not sure if this is still updated, but I installed the new disk drive made sure all the cables are connected correctly and made sure it was the right type of drive, but now when i try and insert a disk it doesnt even seem to drag it in. Any help would be appreciated

dashiellsarnoff - Contestar

Hi, did you change the small board on the drive?

You have to use the old one from the broken drive, because its connected to the mainboard by some sort of software coding.

Good luck!

Claus Gärtner -

I have disc drive that doesn't want to read only a few disc, any solutions would be great.

Ryuko Nariko - Contestar

If you are just replacing the laser from the disc drive do you still have to replace the motherboard ?

Michael - Contestar

No, just the laser is fine. Do not replace the optical drive PCB or your system will not be able to read discs.

Kara Meyers -

Thanks for posting this. It really helped me get through installing the new optical drive. I did swap out the daughter board on the original drive and I am having a problem with it recognizing disks. Any words of wisdom on that subject?

cbellmore - Contestar

I hope you kept the original PCB because if not, sorry to say but you'll never be able to use physical games again…. The Renesas chip is on that PCB and it’s married to your console’s APU.

Kara Meyers -

Followed this guide and managed to replace my drive successfully with no issues. Thanks to all who helped to write this. You guys are awesome !

Alfie Brook - Contestar

hey.

i got a older ps4 that sounds like a…got 4 screws in the back. and i got a newer one (only two screws in the back) from a friend with a non working bluray player, i took both apart and the fit matches, but not sure about the cables

any sugestions ?

br

/jan-erik, gothenburg, sweden

jan-erik haug - Contestar

If your drive still doesn’t work after replacing. It’s your motherboard FUSE. Google & replace the F6202 fuse (check the others near it as they could be a problem also). This fixed it for us. No new drive or motherboard needed.

pablo renato - Contestar

I have a ps4 that has this disc drive problem where it wont take the disc but what it does is make some grinding sounds when turned on and it does it for a minute and then it stops and then it won't take the disc at all ive replaced the drive twice and still got

The invader 2 - Contestar

hello, i have a PS4 ΚΕΜ-860 PAA with a BDP-015 and the model is CUH-1116A,

what optical drive should i buy, because i cant find excacly for CUH-1116A, only similar numbers

thanks

georgepetsios - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 130

Ultimos 7 días: 826

Ultimos 30 días: 5,377

Todo El Tiempo: 307,356