Introducción
Utiliza esta guía para reemplazar la tarjeta AirPort en su Mac Pro a finales de 2013.
Qué necesitas
-
-
Desliza el interruptor de bloqueo hacia la derecha, hasta la posición de desbloqueo.
-
-
-
Quita los cinco tornillos Torx T10 de 5.1 mm de todo el perímetro exterior del ensamblaje del ventilador.
Fat Mango is correct. That said. If you do pull the fan assembly note that the screws are all held in with blue Permatex and breaking them free takes a fair amount of effort. Getting a good set of Torx screwdrivers is a must.
Hey guys, what would happen if you only replace one card.. I have a D300 but the plan is to upgrade to D500 or D600. So If I can afford and install one instead of the pair would it increase something? or will it cause any conflict? I guess I don’t understand if I the Mac Pro has 2 D300 graphic cards that means each has 1GB? Same as If I would Install 1 D600 that would increase 3GB only? Thanks.
D300 = 2GB each card. Very few apps uses two cards at the same time.
Gio Cas -
The (5) Screws are Apple part number 923-0713
-
-
-
Mientras sostienes el ensamblaje del ventilador con una mano, afloja los dos tornillos cautivos T8 en el soporte del cable del ventilador.
On my machine, a TR7 worked to remove them due to the weird angle.
-
-
-
-
Usa el extremo plano de un spudger para levantar la tapa del ensamblaje del ventilador.
-
Remueve la tapa del ensamblaje del ventilador.
There is a thin circle of double sided adhesive that must be loosened in order to remove the plastic cover.
-
-
-
Retira los tres tornillos T4 de 3.7 mm que sujetan la cubierta de metal al compartimiento de la placa AirPort.
I had better luck using a T5 driver.
Same here. Mine were T5, not T4.
t4 was good for me
-
-
-
Usa la punta de un spudger para desconectar los cuatro cables de antena AirPort de la tarjeta AirPort.
-
-
-
Quita los tres tornillos T4 de 3.7 mm que sujetan la placa AirPort al ensamblaje del ventilador.
-
-
-
Retira los dos tornillos Torx T4 de 3.7 mm que sujetan la tarjeta AirPort a la placa AirPort.
-
-
-
Desliza la tarjeta AirPort fuera de su zócalo en la placa AirPort.
-
Para volver a ensamblar tu dispositivo, sigue estas instrucciones en orden inverso.
Para volver a ensamblar tu dispositivo, sigue estas instrucciones en orden inverso.
Cancelar: No complete esta guía.
3 personas más completaron esta guía.
Un agradecimiento especial a estos traductores:
100%
Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›
4 comentarios
Is there a way to replace the Mac Pro Airport card with a more recent one, like when you insert a recent one in an old macbook pro to get new features such as "unlock my mac with my apple watch" ? This is an interesting question that remains unanswered (until now ?)
I wondered the exact same thing. I can see zero reason to remove the fan assembly from the top of the machine just to replace the wifi card. The only reason I can see for doing it would be if you drop a screw it’s at least easy to get to, because everything is separate from the core unit.