Saltar al contenido principal

Introducción

Esta guía se utiliza para reemplazar la tapa trasera del dispositivo o como una precursora para acceder los componentes internos del dispositivo.

  1. Apaga el dispositivo. Usa tu herramienta de apertura de plástico para calzar entre los rebordes alrededor de los lados del dispositivo. Haz palanca en cada lado, uno a la vez.
    • Apaga el dispositivo.

    • Usa tu herramienta de apertura de plástico para calzar entre los rebordes alrededor de los lados del dispositivo. Haz palanca en cada lado, uno a la vez.

    • No te acerques al puerto USB de la base del dispositivo, ya que puedes romper el panel trasero.

    I had a heck of a time doing this, spent ten or twenty minutes carefully prying, and I STILL cracked the case. At least on mine, the case was held in VERY well and required prying pretty much everywhere before it would let go. The tools I bought from iFixit really helped, but still a royal pain to open.

    pacmanmaster - Contestar

    a couple of obscure things that might help in opening:

    guitar pick. get a few; they are cheap.

    a prying device made for the sign industry: its called"lil' chizler". I have found that this to be the most helpful opening tool.

    http://www.ebay.com/itm/like/16184595677...

    also

    https://www.qualitylogoproducts.com/trad...

    you can use the broken screen unit to test.

    Len Gorsky - Contestar

    Add "remove the sim tray"...

    Iain Lennon - Contestar

    I echo the previous - a right royal pain to get the cover off! I started on the right side as seemed to be more give there… iFixit tools helped tho!

    Steven Emery - Contestar

    Just for the sake of clarity, I would add that you need to pry between the plastic bezel and the back casing. Not between the glass and bezel. Someone had already tried on the one I worked on and part of the bezel was missing in the top right corner. Made my job easier!

    The best tools for this part are definitely something like the iFixit Jimmy and their opening tool, a few guitar picks and a spudger. Not too difficult once you get the first separation.

    Cool_Breeze - Contestar

    I managed to easily crack the screen, guess I’ll have to order a new one and “try” to put it in, in addition to the original job of replacing a dead battery on Nexus 7 2013..ahhhhhh, slow learner…

    Gary Stamey - Contestar

    Opened the case for the first time. It took me a while to find any gaps, but I found that the easy way to begin was using your fingernail to get into the sides. The middle left and middle right seemed a lot easier to…slip a nail in compared to the rest of the case, especially the corners and the top and bottom. With a small opening on both sides I used the opening tool to increase the gaps while using a couple of guitar picks to prop up the device against the back case. With most of the sides exposed, I worked on the bottom (create opening, leave a guitar pick to keep that part open, use the opening tool to get the rest out), and the opening was pretty much complete.

    So far only the corners of the back case showed small cracks and my screen was pretty much unscathed.

    Nam Lam - Contestar

    This method worked best for me! Start opening on the middle left and right sides, then prop them open with guitar picks and use to the opening tool (carefully) prying up several times moving away from the middle towards the corners to pop off the back casing.

    Frank's VR -

  2. Trabaja con los dedos alrededor del reborde entre el dispositivo y la tapa posterior. Usa la herramienta de apertura de plástico y los dedos para separar cada lado hasta que el dispositivo y la tapa trasera estén completamente separados.
    • Trabaja con los dedos alrededor del reborde entre el dispositivo y la tapa posterior. Usa la herramienta de apertura de plástico y los dedos para separar cada lado hasta que el dispositivo y la tapa trasera estén completamente separados.

    • Ten cuidado en las esquinas. El cuerpo del dispositivo puede ser frágil.

Conclusión

Para volver a ensamblar tu dispositivo, sigue estas instrucciones en orden inverso.

16 personas más completaron esta guía.

Un agradecimiento especial a estos traductores:

en es

85%

¡ Mariana nos está ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Heather

Miembro Desde 22/01/15

1,404 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 20-16, Maness Winter 2015 Miembro de Cal Poly, Team 20-16, Maness Winter 2015

CPSU-MANESS-W15S20G16

4 Miembros

24 Guías creadas

4 comentarios

Step left out. ifixit.com video on Youtube show use of craft knife as first step to get into very tight case fitting, then the use of plastic pry tool to go around releasing the backcover.

nodakman84 - Contestar

I didnt read the comment about it being tight and using a knife, until I had damaged the prying tools :-(

Bill Walker - Contestar

How do u take off the cover do u have to have that tool

Sharon Catalli - Contestar

I had very little problem prying of the back of my nexus 7 2012. Once you get the first corner done, the rest comes pretty easy.

I ended up using an old hotel keycard as a spudger and it worked fine.

I needed access to the cables that connect the touchscreen to the motherboard so that my touch screen would respond.

Worked like a charm!

Mister Muscles - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 7

Ultimos 30 días: 27

Todo El Tiempo: 11,708