Saltar al contenido principal

Introducción

Sigue esta guía para quitar y reemplazar la placa lógica del iPhone SE 2020.

Nota: La placa lógica de cada iPhone y el sensor de huellas dactilares Touch ID están emparejados de fábrica, por lo que reemplazar la placa lógica deshabilitará Touch ID a menos que también instales un botón de inicio que haya sido correctamente emparejado con tu nueva placa lógica.

  1. Reemplazo de la placa lógica del iPhone SE 2020, Remueve los tornillos pentalobe: paso 1, imagen 1 de 1
    • Antes de comenzar, descarga la batería de tu iPhone por debajo del 25%. Una batería de iones de litio cargada puede incendiarse y / o explotar si se perfora accidentalmente.

    • Apaga tu iPhone antes de comenzar el desmontaje.

    • Abrir la pantalla del iPhone dañará sus sellos impermeables. Si no reemplazas los sellos, tu teléfono ya no será resistente al agua.

    • Retira los dos tornillos pentalobe de 3,5 mm en el borde inferior del iPhone.

    • La apertura de la pantalla del iPhone comprometerá sus sellos de impermeabilidad. Ten listos los sellos de repuesto antes de seguir adelante con este paso, o ten cuidado de evitar la exposición a líquidos si vuelve a ensamblar su iPhone sin reemplazar los sellos.

    just how long are those screws- i turn and turn and turn and the lift off is soooo slight, seemingly insignificant…

    An. Jahnke - Contestar

    I would recommend, from the very beginning, dumping all tools out of the kit (if you got it) and using that white paper tool box as a tray to organize the screws and braces in. It’s nice to work over because it catches screws well and makes it easy to see them if you drop any.

    Johnny Emrica - Contestar

    That’s a great idea thank you

    Mohamed Dekkiche -

    Screw to the left of the charging port will not come out. Screw on the right came out no problem. Any ideas?

    Bill Maher - Contestar

  2. Reemplazo de la placa lógica del iPhone SE 2020, Calentar la pantalla: paso 2, imagen 1 de 1
    • Calentar el borde inferior del iPhone ayudará a suavizar el adhesivo que asegura la pantalla, facilitando la apertura.

    • Usa un secador de pelo o prepara un iOpener y aplícalo en el borde inferior del teléfono durante aproximadamente 90 segundos para suavizar el adhesivo que se encuentra debajo.

    No hair dryer so GENTLY heated over stove burner

    John Toth - Contestar

    Hello,

    What temperature is suitable for removing the front display ? I bought i-Fixit ProTech which is not include the heating "roller" . Thanks for help

    Jiří Sítko - Contestar

    Ich habe eine heiße Wärmflasche verwendet. Das hat gut funktioniert :-)

    Moritz Hartges - Contestar

    I laid my phone face-down on my 3D printer’s heated bed, and set the temperature to 60 C. After a few minutes, it was ready to loosen.

    Nate B - Contestar

    If you don’t have an “iOpener” or heat gun, try using an electric heating pad. I have a small $11 pad I got at CVS for my knee. On medium heat it worked fine for removal and with the “pennies” for setting the new seal.

    Pete P - Contestar

  3. Reemplazo de la placa lógica del iPhone SE 2020, Separa la pantalla: paso 3, imagen 1 de 2 Reemplazo de la placa lógica del iPhone SE 2020, Separa la pantalla: paso 3, imagen 2 de 2
    • Aplica una ventosa en la mitad inferior del panel frontal, justo encima del botón de inicio.

    • Asegúrate de que la ventosa no se superponga con el botón de inicio, ya que esto evitará que se forme un sello entre la ventosa y el cristal frontal.

    • Si tu pantalla está muy agrietada, cubrirla con una capa de cinta adhesiva transparente puede permitir que la ventosa se adhiera. Alternativamente, se puede usar una cinta muy fuerte en lugar de la ventosa. Si todo lo demás falla, puedes pegar la ventosa a la pantalla rota.

    Even with using high heat from a blow dryer, I had to put the suction cup over the home button or the bottom edge wouldn’t lift at all. That waterproof adhesive is incredibly strong.

    Aaron Soderholm - Contestar

    As others have said, this part really stinks, but it’ll work if you keep trying. Agree with multiple rounds of hair dryer on high (did about 60-90s each time), and with having to out the suction cup over the home button. You don’t need a big gap to pry it open - it’ll be slight …

    Johnny Emrica - Contestar

    Patience is the key here. Expletives and patience. Like previous comments say, putting the suction cup over the home button (I used packing tape to maintain the seal) will allow you to apply force to the proper location to separate the screen. Good luck!

    J Rawlinson - Contestar

    Get a suction cup pliers. It’ll make this part fun

    Bradley Steiner - Contestar

  4. Reemplazo de la placa lógica del iPhone SE 2020: paso 4, imagen 1 de 3 Reemplazo de la placa lógica del iPhone SE 2020: paso 4, imagen 2 de 3 Reemplazo de la placa lógica del iPhone SE 2020: paso 4, imagen 3 de 3
    • Tira hacia arriba de la ventosa con una presión firme y constante para crear un pequeño espacio entre el panel frontal y la caja trasera.

    • Inserta un púa de apertura en el espacio.

    • El adhesivo hermético que sostiene la pantalla en su lugar es muy fuerte; crear esta brecha inicial requiere una gran cantidad de fuerza. Si te resulta difícil abrir un espacio, aplica más calor y balancea suavemente la pantalla hacia arriba y hacia abajo para debilitar el adhesivo hasta que cree suficiente espacio para insertar la herramienta.

    The screen on my phone was so broken, a suction cup did not work, so I softened the adhesive with a blow dryer and used a Jimmy to carefully pry open the phone from the bottom just enough to slip a pick in.

    charguy - Contestar

    Just completed a smashed screen replacement, this is probably the most time consuming part. Used packing tape to cover the screen to help create a suction surface (had to replace it a couple times because it pulls away after a purple good pulls ) Used consistent heat for about 5 minutes, then stuck a pick in the tiniest opening… and pry pry pry!

    Brian Gill - Contestar

    I failed at this step. No amount of heating, pulling, and rocking opened up enough of a gap to slip in even a knife let alone the blue plastic tool. That's with a phone that has an undamaged screen - just trying to replace the battery. Apple won this round :(

    Michael Sherman - Contestar

    Be really careful here. I placed a sucker to the front and rear to help lever off the screen. However, the whole thing came away much easier than I anticipated and I ripped the front part completely away from the rear, tearing all three connector cables. New iPhone required.

    Chris Wood - Contestar

    Note that the opening pick they show here does not appear to come with the kit, which is a bummer! The plunger, the mini blue crowbar thing, these are too thick. I ended up using a really thin guitar pick.

    Johnny Emrica - Contestar

    Following careful methods can mostly preserve the seal and reusable. Won’t be as water tight but probably still pretty good.

    Bottom edge is pull up with suction + separating tool. Use small precision scissor to cut any tape that gets overly stretched upon initial opening.

    - For the 2 long edges, use an exacto knife to separate the seal from the screen. This keeps the tape on the chassis. Go slow along the long sides. Becareful to avoid scratching the paint on underside of the screen’s edge.

    - Top corners have a thick sealed tape. Best to just use separating tool to twist it open.

    In summary, top and bottom edge use separating tool. Side long edges can use exacto knife to gradually gently separate the seal from underside of the screen’s edge.

    Howard - Contestar

    4 picks and an exacto knife, plus 45 minutes later, I finally got it to open! Thanks tor the tip!

    Cat - Contestar

    Intact screen, check. Tool kit, check. Hair dryer hot enough to make the phone too hot to touch, check. Following all instructions, check. Screen still in place and refusing to come off, check.

    I heated, reheated, pulled and pulled. I simply could not get it off. Worked at it for an hour and a half, and I’m not a small guy. Yes it is hard to hold, but could get a grip. Just could not get it to budge. Off to the iPhone repair shop tomorrow. Anybody want to buy a repair kit and replacement battery?

    Jim Meyers - Contestar

    After struggling for 30m, I looked up some alternate methods and found this helpful:

    https://www.youtube.com/watch?v=25zAK5mG...

    - I used a utility knife and pried up right under the home button

    - the angle matters! I was trying to go too far down before going in. The top surface of the phone is rather thin, so you go in after barely getting under the chassis lip

    - tilt utility knife left to right once you’ve got it under to work it in

    - leave the utility knife in, and now add that pick

    Jared Wilk - Contestar

    Pro-tip: don't be an idiot like me. Instead, remove the screen protector you have on the phone before applying the suction cups. Derp.

    hunter.geofizz - Contestar

    I struggled with a hair dryer at first and a singular suction cup. However, I tried putting packing tape on the spot where I put the suction job (even though my screen isn't cracked) and I was able to do it first try with ease. Definitely recommend packing tape.

    Alessio Toniolo - Contestar

    Suction cup pliers. Dead easy

    Bradley Steiner - Contestar

  5. Reemplazo de la placa lógica del iPhone SE 2020: paso 5, imagen 1 de 3 Reemplazo de la placa lógica del iPhone SE 2020: paso 5, imagen 2 de 3 Reemplazo de la placa lógica del iPhone SE 2020: paso 5, imagen 3 de 3
    • Desliza la púa de apertura hacia arriba por el borde izquierdo del teléfono comenzando en el borde inferior y moviéndose hacia los botones de control de volumen y el interruptor de silencio, rompiendo el adhesivo que mantiene la pantalla en su lugar.

    • Detente cerca de la esquina superior izquierda de la pantalla.

    • No intentes sacar el borde superior de la pantalla de la caja posterior, ya que se sujeta con clips de plástico que se pueden romper.

    My Plektrum worked ok, but the edges broke off a bit towards the end

    griffin.weber - Contestar

  6. Reemplazo de la placa lógica del iPhone SE 2020: paso 6, imagen 1 de 3 Reemplazo de la placa lógica del iPhone SE 2020: paso 6, imagen 2 de 3 Reemplazo de la placa lógica del iPhone SE 2020: paso 6, imagen 3 de 3
    • Vuelve a insertar tu herramienta en la esquina inferior derecha del iPhone, y deslízala alrededor de la esquina y hacia arriba del lado derecho del teléfono para separar el adhesivo.

    • No insertes la púa muy lejos, o puedes dañar los cables de la pantalla a lo largo de este lado del iPhone. Insértalo solo unos pocos milímetros, o aproximadamente el ancho del bisel de la pantalla.

  7. Reemplazo de la placa lógica del iPhone SE 2020: paso 7, imagen 1 de 2 Reemplazo de la placa lógica del iPhone SE 2020: paso 7, imagen 2 de 2
    • Levanta suavemente la ventosa para levantar el borde inferior de la pantalla.

    • No levantes la pantalla más de 15º o corres el riesgo de forzar o romper los cables planos que conectan la pantalla.

    • Tira de la pequeña protuberancia en la ventosa para quitarlo del panel frontal.

  8. Reemplazo de la placa lógica del iPhone SE 2020: paso 8, imagen 1 de 3 Reemplazo de la placa lógica del iPhone SE 2020: paso 8, imagen 2 de 3 Reemplazo de la placa lógica del iPhone SE 2020: paso 8, imagen 3 de 3
    • Desliza una púa de apertura debajo de la pantalla alrededor de la esquina superior izquierda y a lo largo del borde superior del teléfono para aflojar el último adhesivo.

    I did end up using just a smidge of IFIXIT adhesive remover along the edge before opening and that seemed to really help

    Karen Flowers - Contestar

  9. Reemplazo de la placa lógica del iPhone SE 2020: paso 9, imagen 1 de 2 Reemplazo de la placa lógica del iPhone SE 2020: paso 9, imagen 2 de 2
    • Desliza el ensamblaje de la pantalla ligeramente hacia abajo (lejos del borde superior del teléfono) para desenganchar los clips que lo sujetan a la caja trasera.

  10. Reemplazo de la placa lógica del iPhone SE 2020: paso 10, imagen 1 de 3 Reemplazo de la placa lógica del iPhone SE 2020: paso 10, imagen 2 de 3 Reemplazo de la placa lógica del iPhone SE 2020: paso 10, imagen 3 de 3
    • Abre el iPhone moviendo la pantalla hacia arriba desde el lado izquierdo, como la contratapa de un libro.

    • No intentes separar por completo la pantalla todavía, ya que varios cables planos frágiles aún la conectan a la placa lógica del iPhone.

    • Apoya la pantalla contra algo para mantenerlo apuntalado mientras está trabajando con el teléfono.

    Nach RECHTS klappen - nicht nach links!

    Manfred Wachtel - Contestar

    Als ich das Flachbandkabel auf der rechten Seite sah, hab ich mich auch gefragt, ob die das mit nach Links klappen ernst meinen, und das „Buch“ lieber auf japanische Art nach rechts aufgeklappt. Das sollte dringend in der Anleitung korrigiert werden!

    Sebastian Plickert - Contestar

    “Up from the left” means lift up the left side.

    Which is the same as folding to the right.

    “Like the back cover of a book” explains it even more clearly.

    Maybe it gets lost in translation?

    Nick Shtangey -

    Fold to THE RIGHT - not to the left!

    Jim Glenys - Contestar

    When I saw the ribbon cable on the right side, I also wondered if they were serious about folding it to the left, and the "book" would rather be opened to the right in the Japanese way.This should be corrected urgently in the manual!

    Jim Glenys - Contestar

    Hi Jim, the display opens from the left side, toward the right side. It should look like the back cover of a book. Hope this helps. Good luck with the repair!

    Adam O'Camb -

    • Remueve los cuatro tornillos Phillips que sujetan el soporte de cable de pantalla inferior a la placa lógica, de los siguientes largos:

    • Dos tornillos 1,3 mm

    • Dos tornillos 2,8 mm

    • Durante esta guía, controle sus tornillos para que cada uno vuelva de donde salió cuando vuelva a ensamblar. Instalar un tornillo en el lugar equivocado puede causar daño permanente.

    • Remueve el soporte.

    Not Y000 this time haha

    Easy Repair - Contestar

    can same length screws mixed up?

    Brook布魯克 - Contestar

    It is not ideal, but possible for these screws.

    Arthur Shi -

    using the repair kit i purchased with my screen replacement, i am currently having issues removing these screws with the PH000. please help

    Mark Ordaz - Contestar

    I was too, thankfully I had another set that contained the PH00 bit, that worked great for me.

    William Mitchell -

    Ok. My screw is stuck. How do I remove it? Philips head is stripped.

    Kristina Graham - Contestar

    Solved it myself. Firm pressure did the trick.

    Kristina Graham -

    Takes a little pressure with the Philips head

    John Toth - Contestar

    Upon this step, I noticed I had no bracket or screws. I had my screen replaced previously and I’m disappointed to find out the repairperson made no effort to replace these parts. I’ll start trusting myself more to do my own repairs.

    O D - Contestar

    took me awhile to figure out I needed to use PHOO bit for the 2 -1.3 screws

    Karen Flowers - Contestar

  11. Reemplazo de la placa lógica del iPhone SE 2020: paso 12, imagen 1 de 2 Reemplazo de la placa lógica del iPhone SE 2020: paso 12, imagen 2 de 2
    • Utiliza la punta de un spudger para levantar el conector de la batería de su cuenca en la placa lógica.

    • Dobla el cable de conector de batería ligeramente fuera de la placa lógica para prevenir que haga contacto accidentalmente con la cuenca y proporcione potencia al teléfono durante tu reparación.

    Make sure you pry the battery connector off from the right hand side as shown in the picture. Theres a delicate component on the logicboard near the battery connector called a Mosfet which is linked to the battery charging software. If you knock it off accidently you’ll loose battery charging and the phone will boot loop and youll need to have it re-soldered back on.

    Gareth - Contestar

    I can confirm this as I learned my lesson by unknowingly prying the mosfet off. The phone will not charge now and is useless. I really wish they would add a note about this on Step 12 as a warning.

    Jeff -

    So this is it. You don’t have to go any further removing the screen. You can replace the battery right from this point.

    John M - Contestar

    I wish I saw this comment 2 hours ago

    Kenneth Moore -

    This is where I broke my phone, a phone that was working quite well, paid for in full. Just because I had a cracked screen. Be super careful when connecting the cables. I was in a hurry and not paying attention, used too much force when re-connecting and broke those teeny little pins that could not be repaired. A tech tried for an hour to no avail. cautionary tale. Good luck

    Karen Flowers - Contestar

    The display ribbon is a certain length and allows for some give, but behind it is hidden the Home button/TouchID ribbon, which sits against what amounts to a razor blade. This ribbon is much more taut than the display one, and therefore you have far less freedom of movement than you think you do. This is absolutely an intentional trap to discourage replacing your own battery. Quite frankly, it’s despicable.

    Anyway, so beware of that, because although I was very careful and did not even swing the screen very far (not more than 90°), the Home button ribbon tore and now needs to be serviced. Home button is disabled now.

    Apple should be ashamed of themselves for this. Please do look at the legislation effort that people are doing to try to get this kind of sabotage illegal, as well as all sorts of other gimmicks they pull. For a company that makes phenomenal products, they’re controlling like an abusive spouse.

    Dan Knight

    daniel - Contestar

  12. Reemplazo de la placa lógica del iPhone SE 2020, Desconecta la pantalla y digitalizador: paso 13, imagen 1 de 2 Reemplazo de la placa lógica del iPhone SE 2020, Desconecta la pantalla y digitalizador: paso 13, imagen 2 de 2
    • Utiliza el punto de un spudger para levantar el conector inferior de pantalla del su cuenca.

    • Para volver a sujetar conectores a presión como este, presiona sobre un lado hasta que haga clic, luego repite en el otro lado. No presiones en el medio. Si el conector está ligeramente desalineado, el conector puede doblarse y causar daño permanente.

  13. Reemplazo de la placa lógica del iPhone SE 2020: paso 14, imagen 1 de 2 Reemplazo de la placa lógica del iPhone SE 2020: paso 14, imagen 2 de 2
    • Utiliza la punta de un spudger para desconectar el segundo cable inferior de pantalla.

  14. Reemplazo de la placa lógica del iPhone SE 2020: paso 15, imagen 1 de 2 Reemplazo de la placa lógica del iPhone SE 2020: paso 15, imagen 2 de 2
    • Remueve los tres tornillos Phillips de 1,3 mm que sujetan el soporte sobre el conector de ensamblaje del sensor del panel frontal.

    • Remueve el soporte.

    If you are replacing the adhesive liner, the remaining release liner strips will interfere with the two outer screws. I had to cut a working section out of the liner at each location and move it aside with the spudger.

    Thomas Tritt - Contestar

    This part is throwing me for a loop. Having difficulty finding the read head for these screws. Is it the same size as the two small 1.3mm screws in step 12?

    Jared Hensley - Contestar

    ended up getting it with the PH000, I must of just been rushing it.

    Jared Hensley - Contestar

    My bracket looks different and none of the screw heads I have fits.

    Ray Rushing - Contestar

    Mine too? Any help?

    George Waller -

    These screws did not stick to the magnetic screwdriver. Extremely difficult to get them back in place - but with some patience i succeeded :)

    Niklas Brammer - Contestar

  15. Reemplazo de la placa lógica del iPhone SE 2020: paso 16, imagen 1 de 2 Reemplazo de la placa lógica del iPhone SE 2020: paso 16, imagen 2 de 2
    • Utiliza la punta de un spudger para desconectar el conector de ensamblaje del sensor de panel frontal.

  16. Reemplazo de la placa lógica del iPhone SE 2020, Remueve el ensamblaje de pantalla: paso 17, imagen 1 de 1

    Hi ifixit, if you find my method dangerous, please remove it.

    After Step 17, I skipped Step 18 to Step 28.

    At Step 29, I lifted up the four adhesive black pull-tabs to expose the white adhesive side. Next, I use hot air gun and blow on the back cover of the iphone for about a minute (maybe a hairdryer will work too) .

    Warning: Don't overheat the iPhone, or you may accidentally ignite the battery.

    I think the temperature was around 60 DegC.

    Extreme Caution: Do Not overheat. I use my hand to gauge the hotness. Careful not to burn yourself or the board.

    I was able to pull out all the white adhesive tapes easily as the adhesive soften.

    DO NOT TRY this method if you are a novice or inexperience! I am not responsible if you hurt yourself or damage your iphone!

    John - Contestar

    Hey John! I’m glad the repair worked out for you!

    From our research, applying heat does soften the adhesive strips, but it also causes them to lose structural integrity and break more easily. That’s why we normally suggest using heat after the strips are already broken. Removing the Taptic Engine definitely takes a few extra steps, but we feel that it gives fixers the best chance of pulling out the adhesive strips intact.

    Arthur Shi -

    I agree with John, skip 18 through 27. These are to make it easier to remove the battery adhesive. I replaced the batteries on two IPhone 8s. The first one I did all that stuff and the adhesive still broken and I had to carefully pry the battery out anyway. When I reassembled the phone the Home button no longer worked. Looking it up, this is apparently fairly common due to all the fragile wires involved in these steps. The second I skipped these steps and when I reassembled it everything worked fine. Not one of the eight (both phones) adhesive strips came out properly. I fully drained the batteries before doing the repairs. By the way, I use the virtual home button on the one phone, it’s a little annoying, but the phone is still usable if you’re not ready to shell out for a new phone.

    Gary Berman -

    I also skipped these steps. I won’t say it was entirely successful - two of the four adhesive strips broke and could not be grabbed with tweezers. But I had gotten most of the adhesive out already and the battery was quite loose, so I used a warmer under the phone, then gently slid a flat plastic blade under one end of the battery and slowly worked it up the phone. (Dental floss would have been safer-don’t do what I did, kids!)

    Matt D - Contestar

    Likely can skip step 18-28 and all the risks. Battery tape is relatively removable by the following method

    - use a tweezer to pull up a corner of each tape. Then use fingers to peel back all the black tab on top of battery

    - use 2 hands. Index and thumb on both. Pull about 1/4” with one hand, hold the tension and pull 1/4” with the other hand. Alternate, go slow. Pull out all 4 tape completely. I think the pause after each 1/4” while holding the stretched tape firmly prevents the tape from over stretching to become too thin and break.

    - Don’t apply heat, I would guess that makes tape softer and break easier.

    Have tried other methods and failed in the past. Pulling too fast (tape will snap) or use a tweezer to twist/roll (sharp edges will cut tape) Anyway, just use index/thumb on both hands and alternately pull slowly

    I did do 2 iPhone 8 battery change this way. One removed all tape without breaking. Another broken all 4 tape after about 1/3 pulled so likely some factory assembly differeces.

    Howard - Contestar

    I second this, this method works well in most cases. Removing the haptics helps to keep the angle low and pulling the tape as straight as possible

    Hein Blöd -

    Howards method for removing the adhesive works like a charm. The only addition I made was to slightly warm the back of the iphone on a rice pack (used for sore neck muscles—haha). Going back and forth between hands is really crucial. While on hand gives a gentle pull, the other holds the phone from moving. Slow back and forth. Thanks.

    Lynn Thomas - Contestar

  17. Reemplazo de la placa lógica del iPhone SE 2020, Remueve la bandeja de la tarjeta SIM: paso 18, imagen 1 de 2 Reemplazo de la placa lógica del iPhone SE 2020, Remueve la bandeja de la tarjeta SIM: paso 18, imagen 2 de 2
    • Inserta una herramienta de expulsion de la tarjeta SIM, punta, o una un clip de papel en el orificio pequeño de la bandeja de la tarjeta SIM.

    • Presiona para expulsar la bandeja.

    • Esto podría requerir una cantidad significativa de fuerza.

  18. Reemplazo de la placa lógica del iPhone SE 2020: paso 19, imagen 1 de 2 Reemplazo de la placa lógica del iPhone SE 2020: paso 19, imagen 2 de 2
    • Remueve la bandeja de la tarjeta SIM del teléfono.

    • La tarjeta SIM saldrá de la bandeja fácilmente.

    • Al volver a insertar la tarjeta SIM, asegúrate de que esté en la orientación correcta en relación con la bandeja.

    • Una fina junta de goma alrededor de la bandeja de la tarjeta SIM proporciona protección contra el agua y el polvo. Si esta junta está dañada o falta, reemplaza la junta o toda la bandeja de la tarjeta SIM para proteger los componentes internos de su iPhone.

  19. Reemplazo de la placa lógica del iPhone SE 2020, Desconecta la placa lógica: paso 20, imagen 1 de 2 Reemplazo de la placa lógica del iPhone SE 2020, Desconecta la placa lógica: paso 20, imagen 2 de 2
    • Usa el extremo plano de un spudger para hacer palanca y desconectar el conector de cable de cámara de su zócalo.

  20. Reemplazo de la placa lógica del iPhone SE 2020: paso 21, imagen 1 de 1
    • Remueve los dos tornillos que sujetan el soporte de la cámara trasera:

    • Un tornillo separador Phillips de 3.0 mm

    • Un tornillo Phillips de 3.1 mm

    • Los tornillos separadores se remueven mejor utilizando una punta de destornillador para separador de iPhone y una mango de destornillador.

    • Si no hay otro remedio, un pequeño destornillador de cabeza plana hará el trabajo—pero ten precaución extra para asegurarte de que no se resbale y dañe los componentes que lo rodean.

    The screw and standoff are the other way round in this step. The photo shows the small screw removed and the standoff securing the logicboard is circled incorrectly. Also you may find that the standoff screw is not magnetic, making it a little tricky to replace!

    Michael Millington - Contestar

    Hi Michael,

    You are correct; thanks for catching that! The original image was correct, and for some reason the image was updated, and no longer correct. I have reverted it back to the original image.

    Arthur Shi -

    wrong Screws in Picture

    mmiller - Contestar

    Be careful when reassembling. These screws came demagnetized for me in the process, and they’re really hard to put in if that happens.

    Nick Cox - Contestar

    These screws are not magnetized! If you are trying to put them back, use some tweezers to align them, and while still using the tweezers, grab your standoff driver and push down, then you can screw it in with ease.

    Lua Tech - Contestar

  21. Reemplazo de la placa lógica del iPhone SE 2020: paso 22, imagen 1 de 1
    • Remueve la soporte de la cámara trasera.

  22. Reemplazo de la placa lógica del iPhone SE 2020: paso 23, imagen 1 de 2 Reemplazo de la placa lógica del iPhone SE 2020: paso 23, imagen 2 de 2
    • Usa la punta de un spudger para hacer palanca y desconectar el conector flash de su zócalo.

    The small connector is not actually for the flash, the flash and mic module are just below that and connect to the same cable as the power button.

    Bonrad C - Contestar

  23. Reemplazo de la placa lógica del iPhone SE 2020: paso 24, imagen 1 de 1
    • Remueve los dos tornillos que sujetan el soporte de cable superior:

    • Un tornillo Phillips de 2.9 mm

    • Un tornillo Phillips de 1.3 mm

    Logically - one wouldn’t need to take out all these things to take out something at the bottom of the phone - but in order to get good access to it, you must remove the logic board - which is long and all the way up at the top connected to the antenna. Follow the steps - it works.

    Chris Rainone - Contestar

  24. Reemplazo de la placa lógica del iPhone SE 2020: paso 25, imagen 1 de 1
    • Remueve el soporte del cable superior.

  25. Reemplazo de la placa lógica del iPhone SE 2020: paso 26, imagen 1 de 2 Reemplazo de la placa lógica del iPhone SE 2020: paso 26, imagen 2 de 2
    • Usa el extremo plano de un spudger para hacer palanca y extraer el conector de cable de su zócalo.

  26. Reemplazo de la placa lógica del iPhone SE 2020, Remueve el componente de antena superior izquierda: paso 27, imagen 1 de 1
    • Remueve los tres tornillos de Phillips de 1.3 mm que sujetan el componente de antena superior izquierda

    1,2mm ! not 1,3mm ! thx

    Boni Zei - Contestar

  27. Reemplazo de la placa lógica del iPhone SE 2020: paso 28, imagen 1 de 1
    • Remueve el tornillo de 1.4 mm que sujeta el componente de la antena al borde superior de la caja.

  28. Reemplazo de la placa lógica del iPhone SE 2020: paso 29, imagen 1 de 1
    • Remueve el componente de antena.

  29. Reemplazo de la placa lógica del iPhone SE 2020, Remueve el clip superior de toma a tierra: paso 30, imagen 1 de 1
    • Remueve los dos tornillos que sujetan el clip de toma a tierra en el borde superior izquierdo de la placa lógica:

    • Un tornillo Phillips de 1.5 mm

    • Un tornillo Phillips de 2.6 mm

  30. Reemplazo de la placa lógica del iPhone SE 2020: paso 31, imagen 1 de 1
    • Remueve el clip de toma a tierra.

    what happen if don't put this part?

    albert saens - Contestar

    Hi Albert,

    It’s hard to tell. Most phone functions will probably work, but you may start getting quirky problems.

    Arthur Shi -

    If it comes out it must go back in *no spare parts *

    Josh Brito - Contestar

  31. Reemplazo de la placa lógica del iPhone SE 2020, Desatornilla la placa lógica: paso 32, imagen 1 de 1
    • Remueve los tres tornillos que sujetan la placa madre:

    • Un tornillo Phillips de 1.8 mm

    • Un tornillo separador de 2.5 mm

    • Un tornillo separador de 2.2 mm

    The One 1.8 mm Phillips screw was buried under some gasket material. It took some twezzer work to get that material off.

    I.T. Service Desk - Contestar

    this is probably the most difficult part because the ‘top 2.5 mm on my version was under a piece of ribbon cable that had to be pulled back. Also notice - this picture is inverted. So the locations are reversed (obviously for clarity)

    Chris Rainone - Contestar

    The 1.8mm was indeed buried.

    fotoband - Contestar

    Buried 1.8mm Phillips easily located under the gasket material by zooming in on the photo to see position relative to connectors. Material is fibrous, so be patient.

    Ben Sandness - Contestar

    I’ve been searching on internet about the black stickers on those parts in the phone and I found nothing about them, what are they? Electrical Tapes? Does it make any differences if we remove them? If yes is, there anything else we can use to replace them? We’re they are for any specific purposes? Thanks in advance if anyone can help me understand

    EverWill - Contestar

    They are just there for a last-ditch effort to keep water out of the connectors.

    Duck -

  32. Reemplazo de la placa lógica del iPhone SE 2020: paso 33, imagen 1 de 2 Reemplazo de la placa lógica del iPhone SE 2020: paso 33, imagen 2 de 2
    • Usa una pinza para doblar cuidadosamente el soporte de toma a tierra de la placa lógica fuera del camino.

  33. Reemplazo de la placa lógica del iPhone SE 2020: paso 34, imagen 1 de 2 Reemplazo de la placa lógica del iPhone SE 2020: paso 34, imagen 2 de 2
    • Una la punta de un spudger para mover el tapón de eyección de la tarjeta SIM fuera del camino.

  34. Reemplazo de la placa lógica del iPhone SE 2020, Quita la placa lógica: paso 35, imagen 1 de 2 Reemplazo de la placa lógica del iPhone SE 2020, Quita la placa lógica: paso 35, imagen 2 de 2
    • Usa la punta de un spudger para hacer palanca y desconectar el cable de la antena de diversidad inalámbrica.

  35. Reemplazo de la placa lógica del iPhone SE 2020: paso 36, imagen 1 de 2 Reemplazo de la placa lógica del iPhone SE 2020: paso 36, imagen 2 de 2
    • Usa la punta de un spudger para levantar u desconectar el conector de cable Lightning.

  36. Reemplazo de la placa lógica del iPhone SE 2020: paso 37, imagen 1 de 1
    • Usa la punta de un spudger para hacer palanca y desconectar el conector de bobina de carga inalámbrica.

  37. Reemplazo de la placa lógica del iPhone SE 2020: paso 38, imagen 1 de 2 Reemplazo de la placa lógica del iPhone SE 2020: paso 38, imagen 2 de 2
    • Usa el extremo plano de un spudger para levantar cuidadosamente el extremo del conector de batería de la placa lógica.

    • Ten cuidado de no tirar de los cables. Si sientes resistencia, verifica que todos los cables, conectores y componentes estén alejados de la placa.

  38. Reemplazo de la placa lógica del iPhone SE 2020: paso 39, imagen 1 de 3 Reemplazo de la placa lógica del iPhone SE 2020: paso 39, imagen 2 de 3 Reemplazo de la placa lógica del iPhone SE 2020: paso 39, imagen 3 de 3
    • Tomándola de los bordes, levanta la placa lógica cerca del conector de batería y remuévela.

    • Ten cuidad de no enganchar la placa lógica en ningún cable.

Conclusión

Para volver a montar tu dispositivo, sigue los pasos anteriores en orden inverso.

Lleva tus residuos electrónicos a un Centro de reciclaje electrónico.

¿La reparación no salió según lo planeado? Consulta nuestra Respuestas de la comunidad para obtener ayuda con la resolución de problemas.

12 personas más completaron esta guía.

Un agradecimiento especial a estos traductores:

en es

100%

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Adam O'Camb

Miembro Desde 11/04/15

166,246 Reputación

418 Guías creadas

2 comentarios

Where can you buy a logic board

Charles Plechner - Contestar

perfect, thanks!

wii8 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 23

Ultimos 7 días: 220

Ultimos 30 días: 901

Todo El Tiempo: 13,139