Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

Incluso años después de su lanzamiento en 2014, el OnePlus One es un teléfono inteligente popular. Sin embargo, sus baterías integradas probablemente se habrán gastado después de todos estos años de uso.

Aunque las baterías incorporadas no fueron diseñadas intencionalmente para ser reemplazadas por usuarios finales, esto todavía es posible. Las baterías de repuesto están disponibles en las tiendas en línea. Algunos de ellos incluso mantienen el diseño original de las baterías OnePlus One.

Las baterías se conectan a la placa base a través de una cinta que debe desconectarse con cuidado primero. Con este fin, abre el teléfono inteligente y desmonta la cubierta de la placa base. Las baterías en sí no están embaladas en una tapa dura. Por lo tanto, se requiere un cuidado extra al quitarlos.

Esta guía te guiará paso a paso a través del proceso de extracción de las baterías y le brindará consejos útiles sobre las dificultades mencionadas. Una vez que hayas retirado la batería, simplemente puedes enchufar la tuya ejecutando los pasos en orden inverso.

  1. Extrae la bandeja de la tarjeta SIM. Usando la herramienta de apertura de plástico, con mucho cuidado separa el panel trasero del cuerpo principal del terminal. Ten especial cuidado en los alrededores del ranura SIM y otros puntos débiles. Si encuentras alguna resistencia debido a los puntos de fijación ocultos en la parte interior del terminal. No te preocupes; mueve la herramienta en dirección opuesta al seguro y punto por punto!
    • Extrae la bandeja de la tarjeta SIM.

    • Usando la herramienta de apertura de plástico, con mucho cuidado separa el panel trasero del cuerpo principal del terminal. Ten especial cuidado en los alrededores del ranura SIM y otros puntos débiles.

    • Si encuentras alguna resistencia debido a los puntos de fijación ocultos en la parte interior del terminal. No te preocupes; mueve la herramienta en dirección opuesta al seguro y punto por punto!

    • De arriba a abajo, de izquierda a derecha, sentido horario o contra-horario, una vez llegados a la mitad del terminal, el panel se retira fácilmente con la mano.

    It doesn't mention you have to remove SIM tray first.

    pawel - Contestar

    I used the #0 for the rear panel screws. The #00 is too small and will slip, stripping the screws if you're not extra careful.

    anonymous 2668 - Contestar

    where can i buy the battery??

    Shaun Davis - Contestar

    Has anyone answered this? I am looking too.

    Elie Daou -

    They sell it on here, although I found mine on eBay.

    Roger -

    Aliexpress for $9 (original)

    David van Ballegooijen -

    The last three hidden screws are a !&&* of a time consumer to remove. probably you would need only a certain type of tweezers - I got stuck at midway and now I cannot get go have my phone detect the sim card either probably because the six screws are removed. I can now turn the phone back on but with no service or wifi connections are detected. This phone is a disaster!

    Manan Shah - Contestar

    Ivdid that too but son in law found I had reinstalled sim card in backwards or upside down.

    wildcat75666 -

    Where did you buy the micro USB piece? Thanks a lot!

    Davide Rota - Contestar

    EBay. I bought new battery cause old ibe was dead would not charge. Just ordered new cables fit 9.00 something free shipping. Anyway hope this fixes problem cause new battery did not fix problems.

    wildcat75666 -

    I was able to open going from the microusb slot and working my way around. The corners are tough, though.

    Roger - Contestar

    in my phone the battery was glued with double sided adhesive tape, only on the right side. I pried the left side up first, and carefully removed the battery. to lift the battery I used first used a suction cup(?) followed by a plectrum like tool to lift te battery, and keep it lifted

    Eelco Busch - Contestar

    A word of caution: the back panel is harder to remove than you might think. Especially because you may be removing the *screen* by mistake. When you have a "grip" with the tool make sure the metallic border is not coming off with it, and when you have removed enough to be able to lift the panel, make sure it isn't attached by ribbons - in that case you've been removing the screen. A good idea is to gently press your finger nail against the weak plastic located between the back and the SIM slot, and going up and down and sideways until you hear a click. Then you can start from there with the opening tool. As recommended be very gentle around the SIM slot.

    Menahem Julien Raccah Lisei - Contestar

    Where do I get the plastic opening tool?

    Julie Hejducek - Contestar

  2. Usando un par de pinzas, retira los tapones de plástico. Una vez que se revelan los tornillos ocultos, usa un destornillador PH # 00 para quitar los tres tornillos de 3.175 mm. Utiliza el destornillador PH # 00 para quitar los seis tornillos 3.175 restantes.
    • Usando un par de pinzas, retira los tapones de plástico.

    • Una vez que se revelan los tornillos ocultos, usa un destornillador PH # 00 para quitar los tres tornillos de 3.175 mm.

    • Utiliza el destornillador PH # 00 para quitar los seis tornillos 3.175 restantes.

    The plugs are annoying to open for the first time. They're shaped like little pegs, but I was able to poke at them with screwdrivers enough to open.

    Roger - Contestar

    the best spot to start prying the cover open is at the cable outlet for the power/volume buttons (careful not to dameage the wires)

    Marius137 - Contestar

    A needle works best to remove the plugs.

    Stan Barton - Contestar

    I second this. I used a sewing pin and the plugs came out in no time!

    Liam Ong -

    Be careful not to displace the rear camera when replacing the motherboard cover.

    Liam Ong - Contestar

    when I lifted the motherboard cover the battery cable stuck on it so that I lifted both, the plastic cover and the cable - step 4 below was not necessary to perform. Be careful!

    Rene Hommel - Contestar

    anyone know what is the 6 orange screws in step 2 are called?

    e.g. M2 x 2

    I lost some screws.

    So where can I buy some replacement of these screws?

    Tyler Durden - Contestar

  3. Con una herramienta de abertura de plástico, levanta suavemente la cubierta de plástico negro y retírela del dispositivo.
    • Con una herramienta de abertura de plástico, levanta suavemente la cubierta de plástico negro y retírela del dispositivo.

    At the top right of your device you see a white dot. That white dot is the warranty sticker. You need to take off that sticker in order to get to the screw that lies underneath. Then unscrew that screw. Otherwise you will not be able to pry off this cover.

    Anke - Contestar

  4. Una vez que retiramos la cubierta de la placa madre, notamos que la batería está intacta y tiene una cinta negra adherida a ella, que está montada en la placa lógica. Usando el spudger, comienza a levantar la batería con cuidado desde el lado opuesto a la cinta. Ten en cuenta que hay un adhesivo de alta calidad que mantiene la batería en su compartimento, así que proceda con precaución. Esta batería no está encerrada en una cubierta dura, por lo que es suave y maleable. Se debe tener precaución durante la extracción para no causar daños permanentes.
    • Una vez que retiramos la cubierta de la placa madre, notamos que la batería está intacta y tiene una cinta negra adherida a ella, que está montada en la placa lógica.

    • Usando el spudger, comienza a levantar la batería con cuidado desde el lado opuesto a la cinta. Ten en cuenta que hay un adhesivo de alta calidad que mantiene la batería en su compartimento, así que proceda con precaución.

    • Esta batería no está encerrada en una cubierta dura, por lo que es suave y maleable. Se debe tener precaución durante la extracción para no causar daños permanentes.

    This took a ton of force to remove from the adhesive!

    Also I was able to take off the cable before removing the battery.

    Roger - Contestar

    Is it OK to use the battery if I bent it during removal? I had to 'iron' it flat, but I think it might still be useable...

    Henry Annand - Contestar

    the best way to remove the battery is to lever the left side up from the bottom and remove it from the glue with an old credit card

    Marius137 - Contestar

    Do this! it comes up very easily this way. All the adhesive is on the right side.

    Daniel ONeill -

    Great suggestion with a card to remove the battery!

    Jeff Mack -

    I second Dangerous Picture's suggestion. I found it very helpful to remove the ribbon from the dock (it was easy to do) before trying to remove the battery.

    Stan Barton - Contestar

    on my phone extensive use of glue was concentrated on just one side (right hand side). Not impossible to remove, little tricky

    Rene Hommel - Contestar

    I mistakenly removed the battery with force, and the back peeled and brought out smoke, seemingly like it's gonna explode. Help !!!

    warys Moreno - Contestar

  5. Una vez que se ha liberado la batería, usamos el siempre útil spudger negro para levantar y liberar la cinta de la batería de su base. Puedes desconectar la batería antes de liberarla para facilitar la extracción. Puedes desconectar la batería antes de liberarla para facilitar la extracción.
    • Una vez que se ha liberado la batería, usamos el siempre útil spudger negro para levantar y liberar la cinta de la batería de su base.

    • Puedes desconectar la batería antes de liberarla para facilitar la extracción.

    For step 4, the connection to the battery should always be done as soon as possible so after removing the back plate to the board would be ideal.

    Otherwise, very thorough so far!

    Duc - Contestar

    Thought I was going to snap my battery in half but patience and slight pressure did the trick.

    Also agreeing the battery should be disconnected as soon as possible.

    Rasmus Beck - Contestar

    From where do I procure a new battery for it?????????

    Roderick Edric Chandra - Contestar

    très bon tuto ,aucun problème si vous suivez la procédure ,bravo et merci

    antoine v - Contestar

    There are several connectors to the motherboard. In the picture above, one connector above and, below the screw thread, three more connectors. Be careful to reconnect any connectors accidentally disconnected while disconnecting / removeing the battery. In my case the connector shown at the top of the row came unconnected.

    Jörg Thiesemann-Bihn - Contestar

    salut, pour moi le connecteur à la nappe était collé au cache en plastique qui couvrait la carte mère … mais le reste s’est bien passé.

    Merci pour le tuto !

    Didaf Wazir - Contestar

    Thanks Buddy, I replaced battery of my one plus one and when I switched it on, touch was not working. It was heart sinking panic moment...Then I came across https://forum.xda-developers.com/oneplus... post, simple trick of sliding piece of paper below battery solved and infact improved the touch response. Thanks !

    Radhakrishna Shetty - Contestar

    Kifch nikmandha

    asadzoya388 - Contestar

    The worlds best bras. The sexiest Thong and Sport, Bras, Nightwear, Lingerie, Beauty The most beautiful bodysuit. Discover whats hot now.

    https://secretscloset.com/

    walis monaim - Contestar

    When putting in the new battery, the battery ribbon cable did not line up with the dock on the motherboard, on the replacement battery I ordered from iFixIt. I was able to carefully peel back the foil covering ribbon cable, align the cable, then press the foil back in place. Now, everything seems to be working.

    I P - Contestar

Conclusión

Para volver a montar tu dispositivo, sigue estas instrucciones en orden inverso.

188 personas más completaron esta guía.

Un agradecimiento especial a estos traductores:

100%

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Javier Cruz

Miembro Desde 22/09/14

2,169 Reputación

3 Guías creadas

Equipo

USF Tampa, Team 3-3, Brown Fall 2014 Miembro de USF Tampa, Team 3-3, Brown Fall 2014

USFT-BROWN-F14S3G3

3 Miembros

20 Guías creadas

The Apple iPhone sim ejector is not long enough to work on an OPO. A paper clip is a better option.

stephenacook - Contestar

There will be a compatible battery with one pin OnePlus

Gendarmetal Rock - Contestar

Successfully accomplished, thanks to your clear instructions. One note: the adhesive on my unit was applied in about a quarter inch strip along the right underside of the battery as you view it from the back. Peeling up the left side allowed me to reach and release the adhesive on the opposite side with the spudger or knife blade.

That Guy - Contestar

Thank you! I use a slim (but not sharp) butter knife to nudge the battery out slowly by poking the adhesive tape along its length. It was a bit unnerving because I was afraid of damaging the soft battery. Worked out in the end.

Benoit Hogue -

One note to add is that the original battery connector's top was glued to the motherboard cover. I had to remove the battery before I could successfully sepearte the 2. My phone is still working and I'm charging it right now! :)

Thanks for the very detailed guide.

Benoit Hogue -

Works great!

Niv Korah - Contestar

How can I tell if the charging port or the battery that is damaged?

Ang Wei Ming - Contestar

After doing this my screen no longer works. It's just a black screen whether I use the old battery or the replacement.

Terry Atkinson - Contestar

Fixed the black screen issue by taking the cover off and then checking all connections and putting back together. All good now. Hardest part was to get the cover off. Starting from the sim card port worked eventually.

Terry Atkinson -

anyone knows where can i buy a good quality battery? i dont want a cheap replacement...

Moti Dorfman - Contestar

I just got mine from this Ebay seller: http://www.ebay.com/itm/162062594869. It is an original battery, as far as I can tell.

Ordered it on Monday, received it on Friday. It took me about 30 minutes to replace the battery and it seems to work.

ireneverweij -

Hi everypone! Recently i bought the new original Oneplus One battery from this site, in few weeks i'll make an update.

http://www.ebay.com/itm/Original-BLP571-...

Alex Mendez -

Thanks it was verry useful and at the end succesful. With this tutorial i was verry confident.

Jean-Marie Wallut - Contestar

I just very proudly followed these instructions and my phone switches on again \o/

Now the touchscreen is unresponsive :-( what did I do wrong?!

Dud - Contestar

Also- is the old, broken battery hazardous? What should i do with it?

Dud - Contestar

Burning. Flushing down the toilet is also a popular choice.

Alex -

I am looking for the new battery to replace old one in my Oneplus one. Can anyone help me, where can I get the genuine one or at-least a good one?

me_paracom007 - Contestar

Good manual! Be careful the battery cable is attached to motherboard cover. Don't tear it off right away. Loosen the motherboard cover and SLOWLY and CAREFULLY lift it to see whether yours is attached too. Also get 1-2 plastic cards like credit cards to lift the battery from the tray. Mine was glued on the right side if you look at the battery with phone lying on the table face down. Make sure to discharge your battery before removal.

Slava - Contestar

My phone only comes on when it's plugged to power. Could this be a battery problem? How can I get a new battery in Nigeria?

Chioma Ogbonna - Contestar

Great post i have been using one plus one since its release in india still i have that phone no lagging no any issue great phone ever at that price .

Thanks on your marvelous posting! I certainly enjoyed reading it. I will remember to bookmark your blog and will eventually come back from now on.Also Look for <a href="http://www.cabs2go.in/tours/mumbai-to-ma... style="text-decoration:underline;" target="_blank" >Mumbai to Mahabaleshwar taxi</a> I want to encourage that you continue your great writing, have a nice day!

Prabhash Chandra - Contestar

Absolutely flawless. I followed the guide with the recommended battery and some simple tools. It worked like a charm at the very first trial and in 10 minutes. THANK VERY MUCH, SIR.

Manuel Gómez - Contestar

my oneplus one works only when charger is plugged in…turns off immediately or reboots when unlugged…could this be a battery issue…

Venkat Sudheer - Contestar

Since there have been none of these batteries in stock for a long time, I found a Spanish website that sells them quite cheap. They appear to be official OnePlus batteries. Quite handy for any peeps in the EU :) www.impextrom.com

Bruno Pascoal - Contestar

Excellent guide, replaced with the recommended battery. Charged, and is up and running….

boobear97 - Contestar

I would like to thank you for the efforts you have made in. The game is best known for its dark sense of humor and its graphic violence . I am hoping the same best work from you in the future as well. I really appreciate your work. Thanks for you agree for me. geometry dash happy wheels dumb ways to die fireboy and watergirl 4.

happywheels - Contestar

Bought a new battery for USD 9.50 via Ali Express. Lots of suppliers. Thanks to the clear and concise instructions I completed the battery replacement in no time, using a sharp knife to pry things apart and a plastic throw-away knife to help further. Put things back together and the OPO works as a charm. Just goes to show that OnePlus were environmentally friendly back in the old days. Nowadays you throw the phone away when the battery is dead, USD 500 (OP 5T) for a replacement phone. And thanks to the guys at ifixit, their efforts help us keep the world clean.

Rene Boers - Contestar

Réussi. Merci Javier !

didier.vanbogget - Contestar

DONT BUY from this seller. battery not work well https://www.ebay.com/usr/xiongdoudou17?_...

peter h - Contestar

I've had my Oneplus One for nearly 2 years now and while I'm very happy about the hardware and even the software (still on Cyanogen), the battery is starting to become really weak. It used to last way longer with a single charge than it does now and I want to replace it

i think battery is dead because i play many unblock games on my mobile

ana smith - Contestar

Since the day I met him, he knew that today

One day, my memory is filled, surrounded by pictures of me surrounded. Struggling forever in a sentence, "now what to do?...... Play Game: basketball games

famitofu - Contestar

Everything worked like a charm from the first time. Very clear and detailed instructions. Thank you!

Sergiu Negara - Contestar

Great, I peeled off the repaired battery, exactly what you told me, thank you. and now the battery is back

'''temple run 3'''

goalken46 - Contestar

anyone know what is the 6 orange screws in step 2 are called?

e.g. M2 x 2

Tyler Durden - Contestar

Worked like a charm. Like others have said, most difficult part was removing the back cover. The adhesive on the old battery was a little tough as well. My battery cable was also stuck to the back cover. Connecting the new battery cable was pretty easy, just needed to look closely to make sure aligned to snap in. Many thanks!

Sean P - Contestar

Your post is very meticulous and impressive for me, I hope to get more good posts. shell shockers

bearpu1994 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 19

Ultimos 7 días: 155

Ultimos 30 días: 624

Todo El Tiempo: 194,651